SIPLACE D4i 规格说明书英文版.pdf - 第19页
19 Component Feeding Component Changeover Table Technical Data Length 753 mm Width 470 mm Height 922 mm for 830 mm PCB transport height 992 mm for 900 mm PCB transport height 1022 mm for 930 mm PCB transport height 1042 …
18
Component Feeding
Component Changeover Table
SIPLACE component
changeover tables are stand-
alone modules that are easy
to maneuver and can be
docked into the machine.
This ensures that the table is
accurately positioned in the
placement machine. Reels
are kept in the tape container
on the component change-
over table. A cutting device
on the machine automatically
cuts the used tape. The com-
ponent changeover tables
can be set up directly on the
machine or in an external
set-up area with feeder mod-
ules. The benefits of offline
set-up are that the set-ups
can be prepared without
stopping the line. This allows
the set-up to be changed
very quickly using the
changeover table principle.
The component feeders are
at rest during the placement
process, which means that
components can be refilled
and tapes may be spliced
without stopping the
machine. If an optional com-
ponent barcode reader and
the Setup Center option are
installed, it is possible to read
and check the barcodes on
the tape reels. This makes
sure that the component is
allocated to the right track,
and the PCB placement can
be traced using traceability
software.
Dummy feeder modules are
used at unassigned locations
to protect the operators.
19
Component Feeding
Component Changeover Table
Technical Data
Length 753 mm
Width 470 mm
Height 922 mm for 830 mm PCB transport height
992 mm for 900 mm PCB transport height
1022 mm for 930 mm PCB transport height
1042 mm for 950 mm PCB transport height
Height of bottom edge of table bed 680 mm for 830 mm PCB transport height
750 mm for 900 mm PCB transport height
780 mm for 930 mm PCB transport height
802 mm for 950 mm PCB transport height
Weight
without feeder modules
with feeder modules at all locations
74 kg
102 kg
Reel diameter
standard
maximum
up to 432 mm (17")
483 mm (19")
Locations for feeder modules max. 12 (3 x 8 mm S)
Changeover time < 1 minute
Component feeding 4 component changeover tables with tape
reel holders and integral waste containers,
12 locations, each 30 mm wide, for each
component changeover table
Feeder module types Tapes, bulk cases, stick magazines, OEM
feeder modules (surf tape, component dis-
posal module, label feeder modules, inline
programming feeder modules)
Waste container
for remaining empty tape
Communication unit
Component
feeder table
Communication
unit
Tape container
Tape container
Waste container
for remaining empty tape
20
Component Feeding
S Tape Feeder Modules
Packaging Feeder module Width Loca-
tions
Transport
distance
Max.
CO height
Paper and
blister tapes
2 x 8 mm S
a
3 x 8 mm S 01005
b
3 x 8 mm SL
c
1 x 12/16 mm S
a) Extra fiducials provided for feeder position recognition
b) for 01005, 0201 and 0402 in paper tapes
c) SL = Shutterless, from 0201 in paper or blister tapes
30.6 mm
30.6 mm
30.6 mm
30.3 mm
1
1
1
1
2/4 mm
2/4 mm
2/4/8 mm
4/24 mm
d
d) Variable in 4 mm increments
2.5 mm
e
0.7 mm
2.5 mm
14 mm
e
e) PSA Kit available as an option
Blister tapes 1 x 24/32 mm S 42.4 mm 1.5 4/40 mm
d
14 mm
Tape reels 178 - 483 mm diameter (7" - 19")
Cycle S feeder modules up to 20 mm transport distance < 150 ms
Changeover
time
≤ 15 s