SIPLACE D4i 规格说明书英文版.pdf - 第8页

8 Modular Machine Concept Step 1: Placement syst em with 4 gantries Step 2: Selection of the conveyor Single conveyor Flexible dual conveyor Step 3: CO changeov er tables Step 4: Select ion of the feeder modules S tape f…

Machine Performance

Incredibly fast new prod-

uct introduction (NPI) with

external set-up preparation

and vision teaching

The SIPLACE D4i really

comes into its own in flexible

production environments.

For example, NPI can be

implemented as fast as pos-

sible with the SIPLACE Vir-

tual Product Build. This NPI

solution allows you to pro-

gram offline, set up and

check offline and to make

adjustments offline with the

SIPLACE Pro software.

This increases machine utili-

zation and reduces waste.

And with respect to the cur-

rent production run, the

SIPLACE vision teaching

station also makes it

extremely simple and fast to

generate component shape

descriptions, even for com-

plex components. The set-up

process starts once you have

optimized the product and

defined all the components in

the programming system.

This is also done externally

and then checked by means

of the barcode and data

transfer. This makes the

product change child's play:

the program and all the data

are sent to the line and the

new production run can start.

It just can't get any faster!

Lowest dpm with set-up

verification and sophisti-

cated sensors

The highest machine quality

allows the SIPLACE D4i to

produce the highest product

quality. This is guaranteed by

a number of additional

features.

Sensors check the presence

and position of the compo-

nents before and after every

pick-up and placement

operation at the placement

head. The digital SIPLACE

Vision System detects the

components faster and more

reliably than the old analog

technology.

This network of tests consid-

erably lowers dpm rates and

increases the first pass yield.

Types of placement

head

12-nozzle Collect&Place head (C&P12)

PLEASE NOTE IPC value [comp./h]

According to the vendor-neutral conditions of the IPC 9850 standard pub-

lished by the Association of Connecting Electronics Industries.

SIPLACE Benchmark value [comp./h]

The SIPLACE benchmark value is measured during the machine acceptance

tests. It corresponds to the conditions set out in the SIPLACE scope of service

and supply.

Theoretical maximum output value [comp./h]

The theoretical maximum output value is calculated from the most favorable

conditions for each machine type and setting, and corresponds to the theoret-

ical conditions normally used in the industry.

Number of gantries 4

IPC value Benchmark value Theoretical value

Placement head configuration and

placement head rate 4 x C&P12

57,000 66,000 81,500

Modular Machine Concept

Step 1: Placement system with 4 gantries

Step 2: Selection of the conveyor

Single conveyor

Flexible dual conveyor

Step 3: CO changeover tables

Step 4: Selection of the feeder modules

S tape feeder modules

Modular Machine Concept

Sample Configuration

BZ Buffer zone

C&P Collect&Place head

COT Component changeover table

G1 Gantry 1

G2 Gantry 2

G3 Gantry 3

G4 Gantry 4

NCH C&P Nozzle changer for the C&P head

OP Operator panel

PA1 Placement area 1

PA2 Placement area 2

COT COT

C&P

NCH C&P

COT

G4C&P

C&PG2C&PG3

COT

PA2

PA1

NCH C&P

NCH C&PNCH C&P