00193915-0202_AI_PSA_ KitZuführmodule8S_DE+EN.pdf - 第26页
2 Assembly instructions PSA Kit for 8/12/16mm S feeder modules PSA Kit for 8/12/16mm S feeder modules 12/2006 Edition 26 : Remove the spring, the adjusting screw and ro cker 1 from the removed base for rocker 1. : Fit th…
PSA Kit for 8/12/16mm S feeder modules 2 Assembly instructions PSA Kit for 8/12/16mm S feeder modules
12/2006 Edition
25
: Loosen the screws on the base for rocker 1 and remove it (2 Phillips screws).
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2
2 Assembly instructions PSA Kit for 8/12/16mm S feeder modules PSA Kit for 8/12/16mm S feeder modules
12/2006 Edition
26
: Remove the spring, the adjusting screw and rocker 1 from the removed base for rocker 1.
: Fit the adjusting screw, rocker 1 and the new spring, type VD 109 (item no.: 00325305-01), in
the new base. You will not need the original spring again.
2
Set the adjusting screw to the lowest spring tension. 2
2
2
2
2
2
2
2
2
2
2
2
2
2
New base for rocker 1
Fully assembled
new base for rocker 1
Spring, adjusting screw
and rocker 1 on the old
New spring, type VD 109
PSA Kit for 8/12/16mm S feeder modules 2 Assembly instructions PSA Kit for 8/12/16mm S feeder modules
12/2006 Edition
27
: Fit the fully assembled base and fix in place with 2 Phillips screws.
: Fix the light barrier (1 hexagon socket head screw).
: Refit the top tape channel (1 Phillips screw).
: Reattach the cable cover with the ribbon cable.
2
: Screw on the backing plate once more (5 Phillips screws).
: Fit the pick-up window and the cover strip take-up edge (2 slotted-head screws).
: Screw on the lock (1 Phillips screw).
Adjust the lock so that the window flap can move freely 0.02 to 0.05 mm in the vertical direction.
2
Do not loosen the top Phillips screw on the lock. This is glued in place. 2
2
: The cover strip must be clamped as shown:
2