00193915-0202_AI_PSA_ KitZuführmodule8S_DE+EN.pdf - 第29页
PSA Kit for 8/12/16mm S feeder modules 2 A ssembly in structions PSA Kit for 8/12/16mm S feeder modules 12/2006 Edition 29 : Before lifting th e right-hand feeder mod ule, remo ve the two foam cubes in the rear cut-out (…
2 Assembly instructions PSA Kit for 8/12/16mm S feeder modules PSA Kit for 8/12/16mm S feeder modules
12/2006 Edition
28
2.5 Feeder module 2x8 mm
2.5.1 Detaching the conveyor tracks
To carry out the retrofit on the right-hand track (viewed in the tape direction of travel) of the
2x8 mm feeder module, you must first detach the right-hand track from the base element (left-
hand track). 2
2
: Loosen the cable cover (2) so that the seals in the cable gland to the base element can be re-
moved.
Cable cover "2" is only accessible from the right-hand side of the module. The wiring will be
damaged if you do not remove these seals first.
2
Abb. 2.11 - 1 Remove the right-hand feeder module (track) from the base element.
M2.5 hexagon socket head screw
3 M2.5 hexagon socket head screw
4 Right-hand track
2
PSA Kit for 8/12/16mm S feeder modules 2 Assembly instructions PSA Kit for 8/12/16mm S feeder modules
12/2006 Edition
29
: Before lifting the right-hand feeder module, remove the two foam cubes in the rear cut-out (they
can be seen after the cable cover (2) is removed).
: Hexagon socket head screw M 2.5 from the underside of the base element (3).
: Hexagon socket head screw M 2.5 in the cut-out in the right-hand feeder module (2).
: Raise the right-hand feeder module vertically until it comes away from the locating pins in the
base element (5). Do not pull the cables, otherwise the plug-in connectors on the board may
come away.
: Carefully tilt the removed feeder module with the side surface facing outwards so that it lies
lengthwise beside the base element.
CAUTION
Do not detach the drawer unit in the base element. The cable connections from the feeder module
to this drawer unit are long enough if you carefully tilt the feeder module outwards during removal
and place it beside the base element.
Do not pull the cables as you do this. 2
NOTE
If you have opened the right-hand side panel, it is a good idea to grease the stop, the pinion and
the outer circumference of the worm (1-3) sparingly with Isoflex Topas L30 (item no. 00303140-
01). 2
2
2
2
2
2
2
2
2
2
2
2
2 Assembly instructions PSA Kit for 8/12/16mm S feeder modules PSA Kit for 8/12/16mm S feeder modules
12/2006 Edition
30
2.1.2 Converting the feeder
: Fit the concave roller with the collar screw on the new cover strip rocker from the retrofit kit.
2
2
: Remove the cover strip rocker and the board from the feeder module (1 slotted-head screw).
2
The spring can easily drop out during removal. 2
2
2