00198586-02_JC_PMWF2_TX_V2_EN.pdf - 第26页
www.asm-smt.com
6 WF 2 TX-Series V2 Maintenance Clean the Z-Axis of the remaining C&P20x heads 1 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T3, T20
Wear Part: Consumables:
www.asm-smt.com
1 Move all gantries to the end limit for the
heads remaining in the machine.
2 Area of the head to be cleaned. 3 Remove any components from the Z-Axis.
4 If OK → next task. 5 Repeat steps 1 to 4 for the remaining
heads.
www.asm-smt.com
7 WF 2 TX-Series V2 Maintenance Check and clean the magnetic surfaces and scale of X and Y-Axis 2 min 1 / 2
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Conveyor Empty
NOTICE! ESD guidelines are to be followed Tool:
T3
Wear Part: Consumables:
C3, C5
www.asm-smt.com
1 Move all gantries to the end limit at loca-
tion 1.
2 Check X-Axis magnets for contamination
and damage.
3 If you see any damage contact service.
4 If OK clean the X-Axis magnets. 5 Clean the X-Axis scale. 6 Check Y-Axis magnets for contamination
and damage.