Horizon APiX Appendix Manual-low res.pdf - 第20页
INSTALLATION APPENDIX SAFETY FEATURES Chapter Issue 1 June 15 Appendix to Micron Technical Manuals 2.1 CHAPTER 2 INST ALLA TION APPENDIX SAFETY FEA TURES ASM printing machines incorporate safety fea tures that provide a …
Appendix to Micron Technical Manuals
INSTALLATION APPENDIX
SAFETY FEATURES
Chapter Issue 1 June 15 Appendix to Micron Technical Manuals 2.1
CHAPTER 2 INSTALLATION APPENDIX
SAFETY FEATURES
ASM printing machines incorporate safety features that provide a safe operating
environment for the operator and the machine.
SEMI Labelling The following table displays the SEMI labelling applied to the machine:
Warning Definition Location
MOVING MECHANICAL PARTS
Removing this cover exposes moving
mechanical parts that have the potential
to cause serious injury. Disconnect and
lock out the system power before remov-
ing this cover. Refer to the Lockout
procedure at the end of this chapter.
GENERAL WARNING
Refer to the Operator manual or the front
of the Technical Reference manual
Safety chapter for a list of all warnings
and their definitions.
Left Hand & Right
Hand Upper Side
Panel.
POTENTIAL HAZARDS
Removing this cover may expose oper-
ators to parts that have the potential to
cause minor injury.
GENERAL WARNING
Refer to the Operator manual or the front
of the Technical Reference manual
Safety chapter for a list of all warnings
and their definitions.
Left Hand & Right
Hand Safety Covers
ELECTRO MECHANICAL HAZARDS
Removing this cover exposes electro-
mechanical parts that have the potential
to cause serious injury. Disconnect and
lock out the system power before remov-
ing this cover. Refer to the Lockout
procedure at the end of this chapter.
GENERAL WARNING
Refer to the Operator manual or the front
of the Technical Reference manual
Safety chapter for a list of all warnings
and their definitions.
Lower Front Panel
Lower Rear Panel
WARNING / DANGER
Pièces mécaniques en mouvement
Retirer les capots ou couvercles
peut entraîner des blessures graves.
Déconnecter et couper l alimentation
électrique avant deffectuer lentretien
de la machine, se référer au
Manuel de Référence Technique.
Pièces mécaniques en mouvement
Retirer les capots ou couvercles
peut entraîner des blessures graves.
Déconnecter et couper l alimentation
électrique avant deffectuer lentretien
de la machine, se référer au
Manuel de Référence Technique.
Moving Mechanical Parts
Removing covers could result
in serious injury
Disconnect and lockout system power
before servicing refer to the
Technical Reference manual
Moving Mechanical Parts
Removing covers could result
in serious injury
Disconnect and lockout system power
before servicing refer to the
Technical Reference manual
Dangers Potentiels
Retirer les capots ou couvercles peut
exposerle personnel à des blessures
superficielles,
se référer au Manuel Opérateur.
Dangers Potentiels
Retirer les capots ou couvercles peut
exposerle personnel à des blessures
superficielles,
se référer au Manuel Opérateur.
Potential Hazards
Removing cover may expose
operators to minor injury
Refer to the Operator manual
Potential Hazards
Removing cover may expose
operators to minor injury
Refer to the Operator manual
CAUTION / DANGER
WARNING / DANGER
Electro Mechanical Hazards
Removing cover could result
in serious injury
Disconnect and lock out system
power before servicing refer to
the Technical Reference manual
Electro Mechanical Hazards
Removing cover could result
in serious injury
Disconnect and lock out system
power before servicing refer to
the Technical Reference manual
Dangers électromécaniques
Retirer les capots ou couvercles peut
entraîner des blessures graves.
Déconnecter et couper l alimentation
électrique avant deffectuer lentretien
de la machine, se référer
au Manuel de Référence Technique.
Dangers électromécaniques
Retirer les capots ou couvercles peut
entraîner des blessures graves.
Déconnecter et couper l alimentation
électrique avant deffectuer lentretien
de la machine, se référer
au Manuel de Référence Technique.
INSTALLATION APPENDIX
SAFETY FEATURES
2.2 Appendix to Micron Technical Manuals Chapter Issue 1 June 15
Paste Roll Height
Monitor Option -
Label
If the machine is fitted with an optional Paste Roll Height Monitor, then a Class
2 laser product label is attached to the outside of the machine next to the
nameplate.
EMO The machine is fitted with two Emergency Machine Off push button control
switches (EMO’s) located at the front and rear of the machine. Operation of an
EMO shuts down the machine.
Cover Opening printhead covers are fitted with a cam interlock switch to protect
personnel from internal moving parts.
MOVING MECHANICAL PARTS
Removing this cover exposes moving
mechanical parts that have the potential
to cause serious injury. Disconnect and
lock out the system power before remov-
ing this cover. Refer to the Lockout
procedure at the end of this chapter.
GENERAL WARNING
Refer to the Operator manual or the front
of the Technical Reference manual
Safety chapter for a list of all warnings
and their definitions.
Left Hand & Right
Hand Board Safety
Covers
INSTALLATION DETAILS
For installing details for solvent tank see
the machine techncial documentation.
GENERAL WARNING
Refer to the Operator manual or the front
of the Technical Reference manual
Safety chapter for a list of all warnings
and their definitions.
Solvent Tank
Warning Definition Location
LASER RADIATION
DO NOT STARE INTO BEAM
CLASS 2 LASER PRODUCT