00193431-03.pdf - 第30页
2 Assembly instructions Long Board Option SIPL ACE HS-50 HS-50 Modification Long Board Option 03/2007 Edition 30 : Thread the connectin g cable and compressed ai r hose through the power ch ain. 2 Do not attach the plugs…
HS-50 Modification Long Board Option 2 Assembly instructions Long Board Option SIPLACE HS-50
03/2007 Edition
29
: Pull out the BERO until the LED on the BERO goes out.
2
Fig. 2.10 - 1 New stopper unit
: Disconnect the air hose.
: Fit the Y adapter with the additional hose, and connect the additional hose to the new valve.
2
2
Y adapter
Additional hose
New valve
2 Assembly instructions Long Board Option SIPLACE HS-50 HS-50 Modification Long Board Option
03/2007 Edition
30
: Thread the connecting cable and compressed air hose through the power chain.
2
Do not attach the plugs to the connecting cables until they have been laid, otherwise they will not
fit through the power chain. 2
The BERO can be fitted in different positions, so it is sensible to use the foremost position in the
transport direction (with the longest cables) when laying the cables. 2
2
: Fit the BERO in the foremost position.
2
2
2
Run the cables and lines in a gentle arc to prevent kinks. 2
2
2
2
2
2
2
2
2
2
2
2
2
HS-50 Modification Long Board Option 2 Assembly instructions Long Board Option SIPLACE HS-50
03/2007 Edition
31
: Place the spiral hose around the cables to prevent them hanging out.
: Place the spiral hose in the cable clips.
2
Make sure that none of the cables sag in the PCB conveyor travelling range or touch moving parts.2
2
2
2
2
2
2
2
2
2
2
2
2
2
Cable clips
Spiral hose