00191171-01.pdf - 第34页

Offset calib ration system for SIPLACE 80 S15 / S20 / F3 / F4 Oper ating M anual Edition 01/ 98 Page 34 of 47 3. Entering Corrections Note The following sections describe entering corr ections for the various machine typ…

100%1 / 47
Operating Manual Offset calibration system for SIPLACE 80 S15 / S20 / F3 / F4
Edition 01/98
Page 33 of 47
Offset calibration system for SIPLACE 80 S15 / S20 / F3 / F4 Operating Manual
Edition 01/98
Page 34 of 47
3. Entering Corrections
Note
The following sections describe entering corrections for the various machine types in the REAL.MA
file. You require an editor program and a boot diskette in order to edit the REAL.MA file. First make a
backup copy of the REAL.MA file!
3.1 Entering Corrections on the SIPLACE 80 S15
Please observe the following sequence when entering corrections:
− 1
st
gantry 2
− 2
nd
gantry 1
Operating Manual Offset calibration system for SIPLACE 80 S15 / S20 / F3 / F4
Edition 01/98
Page 35 of 47
Gantry 2
The PCB camera offset must be altered in REAL.MA. The correction values are entered in the machine
data in
µ
m!
New Kamera_Offset _X = Old Kamera_Offset_X + Arithmetic mean
New Kamera_Offset _Y = Old Kamera_Offset_Y + Arithmetic mean
Example:
Arithmetic mean: x = -60
µ
m
Old camera offset X: -1780
µ
m
New camera offset X: -1780
µ
m + (-60
µ
m) = -1840
µ
m
Arithmetic mean: y = 50
µ
m
Old camera offset Y: -79620
µ
m
New camera offset Y: -79620
µ
m + 50
µ
m = -79570
µ
m