Setup Center mit Setup Center Interface.pdf - 第17页
SIPLACE 3 Application program interface (API) description Ausgabe 05/2007 17 3.1.3 Enumeration V alidationSt a tus V alidation state of a division 3 3 3.1.3.1 Enumeration T ableT ype T able types valid for SIPLACE machin…
3 Application program interface (API) description SIPLACE
Ausgabe 05/2007
16
3.1.2.5 PackagingUnitLocation
Summary description for PackagingUnitLocation 3
3.1.2.6 ComponentLocationState
Summary description for ComponentLocationState 3
3.1.2.7 MachineSetup
Summary description for MachineSetup 3
3.1.2.8 Table
Summary description for Table 3
3.1.2.9 Enumeration MCState
Machine controller states regarding one division 3
3
Member name Description
Location
Location of the assigned packaging unit
PackagingUnit
Packaging unit assigned to this position
Member name Description
Location (inherited from PackagingUnitLocation)
Location of the assigned packaging unit
MCState
MCState of this division
PackagingUnit (inherited from PackagingUnitLoca-
tion)
Packaging unit assigned to this position
ValidationStatus
Validation status of this division
Member name Description
Machine
Associated machine
Tables
Tables of this machine setup
Member name Description
ComponentLocationStates
State of component locations
TableID
Table ID of the associated table
TableType
Table type of the associated table
Member name Description
Unknown
Initial value
OK
State is o.k.
Deactive
MC has deactivated this track
HardwareError
There is a hardware error on this track
SIPLACE 3 Application program interface (API) description
Ausgabe 05/2007
17
3.1.3 Enumeration ValidationStatus
Validation state of a division 3
3
3.1.3.1 Enumeration TableType
Table types valid for SIPLACE machines 3
3
3
3
3
3
3
3
3
3
Member name Description
None
ValidationStatus: None
Ignore
ValidationStatus: Ignore
Ok
ValidationStatus: Ok
Unchecked
ValidationStatus: Unchecked
Warning
ValidationStatus: Warning
Fail
ValidationStatus: Fail
Member name Description
None
None
ChangeOver120
ChangeOver120
ChangeOver120_0201
ChangeOver120_0201
ChangeOver120_F
ChangeOver120_F
ChangeOver72
ChangeOver72
ChangeOver90
ChangeOver90
ChangeOver90D
ChangeOver90D
Wpc90D
Wpc90D
Mtc1
Mtc1
Mtc2
Mtc2
Wpc120
Wpc120
X
X table
3 Application program interface (API) description SIPLACE
Ausgabe 05/2007
18
3.1.3.2 Enumeration JedecLevel
The IPC/JEDEC Moisture Sensitive Device Levels shall ensure, that components are assembled
within specified floor life 3
3.1.3.3 Enumeration FeederType
Restrictions 3
FeederType values are defined by machine. Possible customer extensions (range > 1000000) are
not supported by this interface (Setup Center). 3
Values 3
Member name Description
L_1
Level 1: Unlimited - The component can be assembled unlimited (max. 30°C
/ 85% RH)
L_2
Level 2: 1 year - The component can be assembled 1 year after the opening
date of the pakkaging unit at (max. 30°C / 85% RH)
L_2A
Level 2A: 4 weeks - The component can be assembled 4 weeks after the
opening date of the packaging unit at (max. 30°C / 85% RH)
L_3
Level 3: 168 hours - The component can be assembled 168 hours after the
opening date of the packaging unit at (max. 30°C / 85% RH)
L_4
Level 4: 72 hours - The component can be assembled 72 hours after the
opening date of the packaging unit at (max. 30°C / 85% RH)
L_5
Level 5: 48 hours - The component can be assembled 48 hours after the
opening date of the packaging unit at (max. 30°C / 85% RH)
L_5A
Level 5A: 24 hours - The component can be assembled 24 hours after the
opening date of the packaging unit at (max. 30°C / 85% RH)
L_6
Level 6: 6 hours - The component can be assembled 6 hours after the
opening date of that packaging unit at (max. 30°C / 85% RH)
Member name Description
Unknown
FeederType is not known
Linear45
Value: 1
Linear95
Value: 2
Linear10
Value: 3
Linear15
Value: 4
Linear30
Value: 5
BulkCase_0402_0603
Value: 6
TwoFeedElectric
Value: 7
Tape8mmElectric
Value: 8
TwoFeedMechanical
Value: 9
OneFeedMechanical
Value: 10
Tape12mm
Value: 11
Tape16mm
Value: 12