Setup Center mit Setup Center Interface.pdf - 第41页
SIPLACE 3 Application program interface (API) description Ausgabe 05/2007 41 3.1.3 Packaging un it definition Figure 10 - packaging u nit location is an examp le, which shows the de termination of a packaging unit locati…
3 Application program interface (API) description SIPLACE
Ausgabe 05/2007
40
Tray changers may have towers (see Figure above - Matrix tray changer location definition), which
are numbered from left to right ascending beginning with 1, if looking from the side where the car-
rier is filled up. The levels of a carrier are numbered ascending, whereas the first level at the bot-
tom of the tower has level=1. The magazines (trays) on the carrier are numbered all the way
through, starting with the magazine which is closed to the zero point of the carrier. 3
3
Fig. 3.12 - 5 Tray feeder location definition
3
Tray feeders without a tower (see Figure above Tray feeder location definition) are numbered like
these with a tower. The only difference is that the first carrier is identified by the corresponding
track and the magazines by the x, y offset from the zero point of the first carrier. 3
3
3
3
3
3
3
SIPLACE 3 Application program interface (API) description
Ausgabe 05/2007
41
3.1.3 Packaging unit definition
Figure 10 - packaging unit location is an example, which shows the determination of a packaging
unit location. 3
3
Fig. 3.13 - 6 Packaging unit location
3 Application program interface (API) description SIPLACE
Ausgabe 05/2007
42
3.2 Abbreviations
3
3
SCI
Setup Center interface
SPI
SIPLACE Pro interface
UID
Unique ID (barcode)
PU
Packaging unit
CLI
Component level indicator
ICL
Identical component lot
COT
Change over table
MTC
Matrix tray changer