00198545-01_JCPM_WF2_CA4V2_EN.pdf - 第34页
www.asm-smt.com
10 WF2 CA4 V2 Clean the stationary camera (CPP M) 2 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Transport Empty
NOTICE! ESD guidelines are to be followed Tool: Wear Part: Consumables:
C2
www.asm-smt.com
1 Move all gantries to the end limit. 2 Take out the upper section of the station-
ary camera.
3 Clean the slanted glass.
4 Refit the upper section of the stationary
camera.
www.asm-smt.com
11 WF2 CA4 V2 Clean the feeder modules and cut the tapes 3 min 1 / 1
CAUTION! Refer to safety instructions in user manual before commencing Maintenance
Machine Status OFF Transport Empty
NOTICE! ESD guidelines are to be followed Tool:
T1, T18
Wear Part: Consumables:
www.asm-smt.com
1 Vacuum all loose components from the
feeder modules.
2 Cut the remaining tape directly at the
feeder.
3 Ensure to leave 2 holes overlap when cut-
ting.
4 Repeat steps 1-3 at all feeder tables.