20121120111955_KY8030_2_Maintenance_Manual_Eng_ver1.pdf - 第18页
18 | KY -8030 2 3D Solder Paste Inspec tion System V ersion 1.0 K OH Y OUNG T ECHNOLOGY I NC . During Maintenance ¾ DANGER : Before proceeding with maintenance, remove the power cable and …
Maintenance Manual | 17
¾ DANGER:Donotoperatethesystemwiththebackcoveropened.Thenegligenceofthe
safetyinstructioncanleadtowound/injuryofoperator.
¾ WARNING:Turn the systemoff during part replacement or system calibration. When
thesystemhascompletelystopped,removethepowercablefromthepowersupplyand
thenfollowtherequiredstepsforreplacementorcalibration.
¾ WARNING:Make sure to keep hands and other objects out of the buffer conveyor on
eitherside.Failuretodosomayleadtopersonalinjuryorsystemerror.
¾ WARNING: No person other than an operator should be allowed into the system
operationarea.
¾ CAUTION:Donotattempttomanipulatethevarioussensorsattachedtotheconveyors
ontheleftandrightsidesofthesystembyyourself.Itmayleadtosystemerrororother
problems.
Rear Cover
18 | KY-8030 2
3DSolderPasteInspectionSystem
Version 1.0
KOH YOUNG TECHNOLOGY INC.
DuringMaintenance
¾ DANGER:Before proceedingwithmaintenance, remove thepowercableandplacean
ʺUnderInspectionʺtagonittopreventothersfromconnectingittoapowersupplyby
accident.
¾ WARNING: Before proceeding with maintenance, depressurize the air filter regulator
usingtheairreleasevalve.
¾ WARNING:Onlythosewithsufficienttrainingonthesystemcanperformmaintenance,
inspection, calibration, lubricationor cleaning activities.Always shut down thepower
andthecompressedairtothesystembyfollowingthespecifiedsteps,andthenproceed
withmaintenanceactivitiessafely.
¾ WARNING:WhenitbecomesinevitabletoperformajobwhilethesystemisON,make
suretoperforminspectionandverificationonthesysteminmanualmode
Under Maintenance
Under Maintenance
AIR-IN AIR-OUT
Air Release Valve
Maintenance Manual | 19
TRADEMARKS
©Copyright2005‐2009KohYoungTechnologyInc.Allrightsreserved.
The product names used in this manual are the registered trademarks of their respective
companiesandprotectedbyrelevantpatentandcopyrightlaws.
¾ KohYoung Technology Inc., KY‐80302, 3D Inspection, and ePM‐SPIare theregistered
trademarks
ofKohYoungTechnologyInc.
¾ WindowsandWindowsXParetheregisteredtrademarksofMicrosoftCorporation.
ItisprohibitedtoduplicateallorpartofthismanualwithoutconsentofKohYoungTechnology
Inc.
Theproductspecificationmaybechangedwithoutpriornotice.