Understanding_ the_Cleaning_Process_for_Automatic_Stencil_Printers.pdf - 第12页
Wiper prof ile – wipe 1 12 Understanding the Cleani ng Process fo r Autom atic S tencil P rinte rs
Wipe Types
11
• Dry Wipe – most common used – addresses the solder balls on the bottom of the stencil caused by bleed-out from the aperture
• Vacuum Wipe – address the aperture to remove paste and address clogging of the aperture
• Solvent wipe – used to address the flux on the bottom of the stencil
Wipe frequency
• >15 – excellent gasketing – aperture sizes are not challenging
• 10-15 – good gasketing with the occasional anomaly
• 5-10 – Average wipe frequency – some challenging apertures – some gasketing issues
• 2-5 – Poor gasketing – mismatch of materials – stencil design issues – very challenging components
• 1-each print – something is wrong - requiring a wipe after every print – micro components – pushing envelope
Understanding the Cleaning Process for Automatic Stencil Printers
Wiper profile – wipe 1
12
Understanding the Cleaning Process for Automatic Stencil Printers
Wiper profile – wipe 2
13
Understanding the Cleaning Process for Automatic Stencil Printers