AG900+ and AG900+S Applicators Customer Product Manual.pdf - 第45页

AG − 900+ and AG900+S Applicators 41  2009 Nordson Corporation Part 1098464A Using the Illustrated Parts Lists T o order parts, call the Nordson Customer Service Center or your local Nordson representative. Use these fi…

AG−900+ and AG900+S Applicators

Part 1098464A

 2009 Nordson Corporation

Regulator Heater Cartridge Replacement (contd)

Figure 28: AG-900+/AG900+S Applicator Heater Assembly

1. Heater cartridge

2. Heated cover

3. Pan head screw

4. Porcelain wire connector

5. Ground screw assembly

6. Heater body

7. RTD

6. Coat the new heater cartridges with thermal joint compound, then slide the heater

cartridges into the heater body.

7. Reconnect the heater cartridge leads in parallel as noted earlier, then reinstall the

porcelain wire connectors.

8. Secure the ground wire in place using the screw and lockwasher.

9. Apply Never Seez lubricant to the two pan head screws and use them to reinstall the

cover in place.

10. If the heater assembly was removed from the regulator, apply Never Seez lubricant

to the socket head screws, position the heater assembly against the regulator, position

the applicator assembly at the mounting bracket and reinstall the three socket head

screws.

11. Connect the regulator heater plug to the processor or extension cable and apply

input power.

AG−900+ and AG900+S Applicators

 2009 Nordson Corporation

Part 1098464A

Using the Illustrated Parts Lists

To order parts, call the Nordson Customer Service Center or your local Nordson

representative. Use these five-column parts lists, and the accompanying illustrations, to

describe and locate parts correctly. The following chart provides guidance for reading the

parts lists.

The number in the Item column corresponds to the circled item number in the parts list

illustration. A dash in this column indicates that the item is an assembly.

The number in the Part column is the Nordson part number you can use to order the

part. A series of dashes indicates that the part is not saleable. In this case, you must

order either the assembly in which the part is used or a service kit that includes the part.

The Description column describes the part and sometimes includes

dimensions or specifications.

The Note column contains letters that refer to notes at the bottom of

the parts list. These notes provide important information about the

part.

The Quantity column tells you how many of the part

is used to manufacture the assembly shown in the

parts list illustration. A dash or AR in this column

indicates that the amount of the item required in the

assembly is not quantifiable.

Item Part Description Qty Note

– 0000000

Assembly A

–

1 000000

 Part of assembly A

2 A

2 − − − − −

−

 Part of item 1

NS 0000000

 Part of item 2

NOTE A:

NS: Not Shown

AG−900+ and AG900+S Applicators

Part 1098464A

 2009 Nordson Corporation

AG-900+ Applicator Assembly

See Figure 29.

Item Part Description Qty Note

– 1049800 Module, AG900+ 1

1 981830 Screw, Socket, M6 x 25, zinc 8

2 254423 Needle Stroke Adjustment Compl 1

3 277595 Spring, 17−7PH, H400 1

4 — Air cap

5 1078078 Plug, pipe, skt,1/8−NPT, brass,

in. taper 3

6 940231 O-ring, Viton, 1.063 x 1.188 x 0.063 1 A

7 1049892 Piston Assy, Air, AG900+ 1 A

8 1051774 cartridge Assy, AG900+ 1 A

9 345628 Nut, hex, M4 1

10 940161 O-Ring, Viton, 0.614 ID x 0.070@, BR, 10416 1 A

11 973574 Plug, O−ring,

−18 2

12 954033 Back−up Ring, Single,

1 A

13 940151 O-Ring, Viton, 0563 x 0.688 x 0.063 1

14 1047878 Nozzle flange 1

15 — Nozzle 1 B

16 982374 Screw, Socket, M5 x 40, BL 2

NOTE A: Included in piston/cartridge kit, P/N 1074141.

B: Nozzles are ordered according to customer specifications. Contact Nordson

Customer Service at 877−NORDSON for ordering information.