AG900+ and AG900+S Applicators Customer Product Manual.pdf - 第7页

AG − 900+ and AG900+S Applicators 3  2009 Nordson Corporation Part 1098464A Intended Use of the Equipment  Use the equipment only for the purposes described and within the limits specified in this document.  Do not mo…

AG−900+ and AG900+S Applicators

Part 1098464A

 2009 Nordson Corporation

Safety Information

 Research and evaluate safety information from all applicable sources, including the

owner-specific safety policy, best industry practices, governing regulations, material

manufacturer’s product information, and this document.

 Make safety information available to equipment users in accordance with governing

regulations. Contact the authority having jurisdiction for information.

 Maintain safety information, including the safety labels affixed to the equipment, in

readable condition.

Instructions, Requirements, and Standards

 Ensure that the equipment is used in accordance with the information provided in this

document, governing codes and regulations, and best industry practices.

 If applicable, receive approval from your facility’s engineering or safety department, or

other similar function within your organization, before installing or operating the

equipment for the first time.

 Provide appropriate emergency and first aid equipment.

 Conduct safety inspections to ensure required practices are being followed.

 Re-evaluate safety practices and procedures whenever changes are made to the

process or equipment.

User Qualifications

Equipment owners are responsible for ensuring that users:

 receive safety training appropriate to their job function as directed by governing

regulations and best industry practices

 are familiar with the equipment owner’s safety and accident prevention policies and

procedures

 receive, equipment- and task-specific training from another qualified individual

NOTE: Nordson can provide equipment-specific installation, operation, and

maintenance training. Contact your Nordson representative for information

 possess industry- and trade-specific skills and a level of experience appropriate to

their job function

 are physically capable of performing their job function and are not under the influence

of any substance that degrades their mental capacity or physical capabilities

Applicable Industry Safety Practices

The following safety practices apply to the use of the equipment in the manner described in

this document. The information provided here is not meant to include all possible safety

practices, but represents the best safety practices for equipment of similar hazard potential

used in similar industries.

AG−900+ and AG900+S Applicators

 2009 Nordson Corporation

Part 1098464A

Intended Use of the Equipment

 Use the equipment only for the purposes described and within the limits specified in this

document.

 Do not modify the equipment.

 Do not use incompatible materials or unapproved auxiliary devices. Contact your

Nordson representative if you have any questions on material compatibility or the use of

non-standard auxiliary devices.

Instructions and Safety Messages

 Read and follow the instructions provided in this document and other referenced

documents.

 Familiarize yourself with the location and meaning of the safety warning labels and tags

affixed to the equipment. Refer to Safety Labels and Tags at the end of this section.

 If you are unsure of how to use the equipment, contact your Nordson representative for

assistance.

Installation Practices

 Install the equipment in accordance with the instructions provided in this document and in

the documentation provided with auxiliary devices.

 Ensure that the equipment is rated for the environment in which it will be used and that

the processing characteristics of the material will not create a hazardous environment.

Refer to the Material Safety Data Sheet (MSDS) for the material.

 If the required installation configuration does not match the installation instructions,

contact your Nordson representative for assistance.

 Position the equipment for safe operation. Observe the requirements for clearance

between the equipment and other objects.

 Install lockable power disconnects to isolate the equipment and all independently

powered auxiliary devices from their power sources.

 Properly ground all equipment. Contact your local building code enforcement agency for

specific requirements.

 Ensure that fuses of the correct type and rating are installed in fused equipment.

 Contact the authority having jurisdiction to determine the requirement for installation

permits or inspections.

Operating Practices

 Familiarize yourself with the location and operation of all safety devices and indicators.

 Confirm that the equipment, including all safety devices (guards, interlocks, etc.), is in

good working order and that the required environmental conditions exist.

 Use the personal protective equipment (PPE) specified for each task. Refer to Equipment

Safety Information or the material manufacturer’s instructions and MSDS for PPE

requirements.

 Do not use equipment that is malfunctioning or shows signs of a potential malfunction.

AG−900+ and AG900+S Applicators

Part 1098464A

 2009 Nordson Corporation

Maintenance and Repair Practices

 Perform scheduled maintenance activities at the intervals described in this document.

 Relieve system hydraulic and pneumatic pressure before servicing the equipment.

 De-energize the equipment and all auxiliary devices before servicing the equipment.

 Use only new factory-authorized refurbished or replacement parts.

 Read and comply with the manufacturer’s instructions and the MSDS supplied with

equipment cleaning compounds.

NOTE: MSDSs for cleaning compounds that are sold by Nordson are available at

www.nordson.com or by calling your Nordson representative.

 Confirm the correct operation of all safety devices before placing the equipment back into

operation.

 Dispose of waste cleaning compounds and residual process materials according to

governing regulations. Refer to the applicable MSDS or contact the authority having

jurisdiction for information.

 Keep equipment safety warning labels clean. Replace worn or damaged labels.

Equipment Safety Information

This equipment safety information is applicable to the following types of Nordson

equipment:

 hot melt and cold adhesive application equipment and all related accessories

 pattern controllers, timers, detection and verification systems, and all other optional

process control devices

Equipment Shutdown

To safely complete many of the procedures described in this document, the equipment must

first be shut down. The level of shut down required varies by the type of equipment in use

and the procedure being completed.

If required, shut down instructions are specified at the start of the procedure. The levels of

shut down are:

Relieving System Hydraulic Pressure

Completely relieve system hydraulic pressure before breaking any hydraulic connection or

seal. Refer to the melter-specific product manual for instructions on relieving system

hydraulic pressure.