CM88Maintenace2x.PDF.pdf - 第83页

Page 4-1 3Y3C-E-MMD04-A01-00 Chapter 4 UPDATING UPDATING Updating This chapter describes updating the recognition device and system. The chapter configured as follows. 4-1 Updating the recognition device This section des…

100%1 / 114
Page 3-54
3Y3C-E-MMD03-A04-00
Page 4-1
3Y3C-E-MMD04-A01-00
Chapter 4
UPDATING
UPDATING
Updating
This chapter describes updating the recognition device and system.
The chapter configured as follows.
4-1 Updating the recognition device
This section describes updating the recognition device.
4-2 Updating the system
This section describes updating the system.
Page 4-2
3Y3C-E-MMD04-A01-00
4-1 Updating the Recognition Device
The recognition device is updated by the floppy disk.
It is unnecessary to carry out the following operation at every turning on the power, after doing it in
updating.
4-1-1 Updating Procedures
1. Press
Machine
adjust
.
• “Machine Adjustment Menu” appears.
2. Press Recog unit maint .
• The “Recognition Unit Maintenance” screen
appears.
3. Press .
To the next page
Recog unit
update