CM88Maintenace2x.PDF.pdf - 第84页
Page 4-2 3Y3C-E-MMD04-A01-00 4-1 Updating the Recognition Device The recognition device is updated by the floppy disk. It is unnecessary to carry out the following operation at every turning on the power , after doing it…
Page 4-1
3Y3C-E-MMD04-A01-00
Chapter 4
UPDATING
UPDATING
Updating
This chapter describes updating the recognition device and system.
The chapter configured as follows.
4-1 Updating the recognition device
This section describes updating the recognition device.
4-2 Updating the system
This section describes updating the system.
Page 4-2
3Y3C-E-MMD04-A01-00
4-1 Updating the Recognition Device
The recognition device is updated by the floppy disk.
It is unnecessary to carry out the following operation at every turning on the power, after doing it in
updating.
4-1-1 Updating Procedures
1. Press
Machine
adjust
.
• “Machine Adjustment Menu” appears.
2. Press Recog unit maint .
• The “Recognition Unit Maintenance” screen
appears.
3. Press .
To the next page
Recog unit
update
Page 4-3
UPDATING
4
3Y3C-E-MMD04-A01-00
Updating the Recognition Device
4. Insert the recognition system disk
into the drive.
5. Press Update start .
6. After the update, pull out the recogni-
tion system disk and return to the
main menu, then turn off the power.
Recognition system
floppy disk
(for update)
4-1-2 Error Massages in Updating
When an error happens in updating, the operation stops and the message appears. Take the
solutions referring to followings.
3Y3C-121TE
.oN segasseM snoituloS
.1ksidyppolftresnI .evirdehtotniksidyppolfmetsysnoitingocerehttresnI•
.2dnuoftonelifgoceR .ksidyppolfmetsysnoitingocerreporpehttresnI•
.3hctamsimnoisreV .noisrevMORehtotgnidnopserrocksidyppolfmetsysnoitingocerreporpehttresnI•
.4tluafecivedgoceR
.selbacehtfonoitcennocehtkcehC.tnemevomfororrenasahecivednoitingocerehT•
.suhtiwtcatnocekaM•
.5)srehtO(
.reporpsiksidyppolfmetsysnoitingocerehttahtenimaxE•
.suhtiwtcatnocekaM•