SOM-1732-001.pdf - 第10页
7 . Scope of Actions • At Start of Automatic Operation When the [ST AR T] button on the operation panel is pressed, the ACV data for all feeders used in the current program is checked. When no error is detected, the oper…
6. Tape Feeders
• A tape feeder provided with a tag assembly (a tag and a handle) can
be used in the ACV system. See Fig. 2.
Note that the shape of the Tag differs from that of the tape
feeder used in the SIF system.
• A tape feeder without a tag assembly can be used in the ACV system
after it is provided with a tag assembly.
Fig. 2
6. Tape Feeders
0310-001 8 AIP01EGP
Note
175.0 ± 0.5 (Tag Assembly
Mounting Dimension)
Tag Assy
Tag
SIF ACV
Handle
7. Scope of Actions
• At Start of Automatic Operation
When the [START] button on the operation panel is pressed, the ACV
data for all feeders used in the current program is checked. When no
error is detected, the operation continues.
When the feeders are checked in advance at the "ACV Check
Status" tab sheet, no checking operation is performed at
starting time of the machine.
• When a feeder is not installed correctly on the feeder carriage or a
feeder is short of components, an error message is issued and
the machine stops running.
• When an error is detected after all feeders are checked, the ma-
chine stops immediately in an error condition and an error mes-
sage is issued.
• All feeders are checked when the machine is restarted ([START]
Button "ON") after the data check is completed without any error
detection for all feeders and the automatic operation is stopped.
When the [FEEDER READY] button is turned OFF and
the door of a feeder carriage is opened or closed, all feed-
ers on the feeder carriage are checked.
• When a feeder is installed incorrectly and the machine stops in an
error condition, re-set it correctly. The machine is set ready to be
operated.
• At Re-Starting after Component Shortage or Pickup Error
The ACV data is checked for all feeders in the same manner as taken
when the automatic operation is started.
• At Program Change
The ACV data is checked for all feeders in the same manner as taken
when the automatic operation is started.
7. Scope of Actions
Note
Note
0310-001 9 AIP01EGP
8. Operation
8.1 "Opn. Mode" Tab Sheet
This tab sheet enables the operator to specify the operation mode for
the ACV system.
To use the ACV function, it is required to specify "Enable" for the ACV
function.
• Sheet Layout
When the "Opn. Mode" tab is pressed in the "OPN. MODE" window
(submenu), the corresponding tab sheet appears. Press the [Next]
button. The following tab sheet appears.
Fig. 3
*1 "ACV Function" Group Box
[Enable] Button
The ACV function becomes available.
[Disable] Button
The ACV function becomes unavailable.
When "Enable" is set for the ACV function and the ACV
checking is started, "ACV Check Mode" appears in the "Op-
erator Message" pane of the "AUTO OPN." window.
8. Operation
*2
*1
Note
0310-001 10 AIP01EGP