Apollo1_Operators_Manuel.pdf - 第47页
47 cab - Produkttechnik GmbH / Tharo Systems, Inc. System Mode MONITOR MODE/ ASCII Dump Mode The monitor mode/ ASCII Dump mode is entered by pressing the key when switching on the printer , and keeping it pressed down un…
46 cab - Produkttechnik GmbH / Tharo Systems, Inc.
System Mode TEST PRINT
The TEST PRINT mode is entered by pressing the key when switching
on the printer, and keeping it pressed down until the system test is completed.
Following, an internal test sample will be printed. (for details see Chapter 10)
Then, the system test will be repeated.
Display
Following the completion of the system test, the display shows "Test print".
LED Display
LED ONL on.
Function Keys
CAN key Cancels the test print.
Switch into SYSTEMTEST mode.
Table 8 h Function keys in TEST PRINT mode
47cab - Produkttechnik GmbH / Tharo Systems, Inc.
System Mode MONITOR MODE/ ASCII Dump Mode
The monitor mode/ ASCII Dump mode is entered by pressing the key
when switching on the printer, and keeping it pressed down until the system
test is completed.
In this mode, the control codes received by the printer are directly printed as
text corresponding to the set font, rather than being interpreted as defined by
the programming.
Display
After the completion of the system test, the display shows "ASCII Dump
Mode".
LED Display
LED ONL on.
Function Keys
ONL key Switch into ONLINE mode.
FF key Initiates a paper feed of about .8 in (21 mm).
Table 8 i Function keys in MONITOR MODE/ ASCII Dump mode
48 cab - Produkttechnik GmbH / Tharo Systems, Inc.
ONL key Switch into OFFLINE mode.
FF key For scrolling down within the file list stored on the card.
Reduces the quantity of labels to be printed.
CAN key For scrolling up within the file list of the card.
Increases the quantity of labels to be printed.
PSE key Confirms file selection.
Moves the cursor to the right when setting the quantity of labels
to print.
Switch into PRINT mode.
System Mode LABEL FROM CARD
Provided that a memory card is installed and a label format is present, in OFFLINE
mode, press the key to enter the LABEL FROM CARD mode.
In this mode, the labels stored on the card can be selected to print; for files
with a variable number of labels the quantity of labels to be printed can be set.
Display
The top line of the display shows "Label from card". The bottom line of the
display shows the file name of the first label file in the list stored on the card.
After the requested label has been selected, for files without a fixed number of
labels the display shows "No. of labels" in the top line and "00001" in the
bottom line.
LED Display
All LED's off.
Function keys
Table 8 k Function keys in the LABEL FROM CARD mode