00196931-01 SM internal DLM Star Repair.pdf - 第15页
Star Repair Workflow Perform standard maintenance and cleaning Service Manual Internal DLM Star Repair 15 3.11 Perform standard m aintenance and cleaning 1. Carefully clean the val ves us ing a Q-tip bud m oistened with …
Star Repair Workflow
Replacement of detective parts Distributer Cap.
14 Service Manual Internal DLM Star Repair
3.9 Replacement of detective parts Distributer Cap.
1. Remove the distributor cap carefully using a screwdriver.
2. Clean all grease residues, ensure nothing enters the vacuum holes!
3. Take a new Distributor cap and release the adhesive foil
4. Centre the Distributor cap (pay attention to the pins) and press it tight.
3.10 Verify all Segments with the segment-segment offset tools.
1. Place and fasten the Star on to the Star Assembly Jig.
2. Fit the segment-segment tool right in segment 1 and the segment-segment tool left in segment 2.
3. Hold the segment-segment tool right and turn the segment-segment tool left.
HINWEIS
The maximum deviation allowed is 5 between segments. If you feel friction or there is a gap
between the plates, readjust the segment. If this doesn’t help, replace the segment.
Perform the above for all 12 segments.
Star Repair Workflow
Perform standard maintenance and cleaning
Service Manual Internal DLM Star Repair 15
3.11 Perform standard maintenance and cleaning
1. Carefully clean the valves using a Q-tip bud moistened with ethanol.
Remove any visible dirt around the valves.
2. Carefully clean the segments using a Q-tip bud moistened with ethanol.
Remove any visible dirt around the segments.
Star Repair Workflow
Perform standard maintenance and cleaning
16 Service Manual Internal DLM Star Repair