Mr. JF Sun ALL syringe_IPS.pdf - 第167页

Edition 4.0 H08M(Q) Head Repair T raining T ext FK-9F98-86-0E 5-3 FUJI MACHINE MFG . CO., L TD. 8. Enter the base IP address and the module number , and then click [Connect]. 9. Select [W ake] - [Automatic recognition] –…

Edition 4.0 H08M(Q) Head Repair Training Text

FK-9F98-86-0E 5-2 FUJI MACHINE MFG. CO., LTD.

5.2 Preparation

1. Remove the covers.

2. Attach the jigs (AA9FA0*) to holders B and H on the head, and then attach the head to

the module.

3. Attach the head to the module and turn the base power ON.

4. To adjust the IPS camera position, it is necessary to move the R-axis to the A-holder

proper data position.

5. Use the Motion Tool Mini software to check the servo count of the head on the module.

6. Push the START button at the main screen to rotate the R-axis. Check that holder A

has moved to the front of the head and then press the CYCLE STOP button.

7. Startup Motion Tool Mini.

CONFIDENTIAL

Edition 4.0 H08M(Q) Head Repair Training Text

FK-9F98-86-0E 5-3 FUJI MACHINE MFG. CO., LTD.

8. Enter the base IP address and the module number, and then click [Connect].

9. Select [Wake] - [Automatic recognition] – [OK] to turn the servo power ON. After

approximately 10 seconds, the current servo count for each of the axes displays. Axis 3

is the R-axis servo counter. Record this value. When adjusting the camera, the

adjustment is performed with the R-axis at this position (the position where the A-holder

is at the front of the head).

Axis map

Axis 0

Axis 1

Axis 2

Axis 3 R

Axis 4 Q

Axis 5 XS

Z-axis

R-axis

Q-axis

CONFIDENTIAL

Edition 4.0 H08M(Q) Head Repair Training Text

FK-9F98-86-0E 5-4 FUJI MACHINE MFG. CO., LTD.

5.3 Component names and explanation of the adjustment

modes

Mode name: displays the currently selected adjustment mode.

Back button: used to switch to a different mode from the currently selected mode.

Set button: used when saving or when selecting modes.

There are six adjustment modes as shown below. The adjustments differ for each mode.

Mode name Details

AUTO MODE The initial screen displayed when the power is supplied

to the head.

ADJ MODE This mode is used to access the 3 adjustment modes

below.

ADJUSTMENT 1 Used for resolution and tilt adjustment.

ADJUSTMENT 2 Used for grayscale and current value adjustment.

ADJUSTMENT 3 Used to check the field of vision.

CONFIGURATION Used to set the function settings.

Back button

Set button

Mode name

CONFIDENTIAL