00191209-01.pdf - 第13页

Arbeitspl an Nachrüstung Software 404.x x an SIPLACE Anlagen Workflow retrof it software versi on 404.xx at SIPLACE machines 13 of 16 4  W orkflow Retrofit Software 404.xx 1 5,13t Line computer 2 0,75t Save master data …

100%1 / 16
Arbeitsplan Nachrüstung Software 404.xx an SIPLACE Anlagen
Workflow retrofit software version 404.xx at SIPLACE machines
12 of 16
2.1
Definitions
Qualified or adequately trained personnel:
Persons familiar with the installation, operation and maintenance of the automatic placement machine and
its accessories and possessing appropriate qualifications for the performance of their tasks, e.g.:
• Having been trained, instructed or authorized to switch circuits and equipment parts on and off in
accordance with safety practice standards, as well as to disable, earth or mark them.
• Having been trained or instructed in accordance with safety practice standards with respect to the
care and use of appropriate safety equipment.
• First aid training.
DANGER
as defined by these instructions means that death, serious personal injury or substantial damage to the
equipment will be incurred if the danger alerts are not observed.
WARNING
as defined by these instructions means that death, serious personal injury or substantial damage to the
equipment may be incurred if the warning alerts are not observed.
Note
as defined by these instructions serves to provide important information about the product or to draw your
special attention to the respective section of the instruction manual.
3 Auxiliary Tools Required
The required tools are written in the proper retrofit instructions.
Arbeitsplan Nachrüstung Software 404.xx an SIPLACE Anlagen
Workflow retrofit software version 404.xx at SIPLACE machines
13 of 16
4 Workflow
Retrofit Software 404.xx
1 5,13t
Linecomputer
2 0,75t
Save masterdata at LC
3 0,5h
ChangeLC/ RetrofitCD
ROMdrive
4 0,5h
UNIX5.0 installationat LC
5 3h
Save MA-Data at
1.Station
6 0,5h
Changeaxis epromat
1.Station
7 1h
Changevision epromat
1.Station
8 1h
Changehead epromat
1.Station
9 0,5h
Restore master data at LC
10 0,5h
LCsoftware installation
11 1,5h
These jobs has to be performed
during the UNIX installation
(during data extract from CD-
ROM)
Arbeitsplan Nachrüstung Software 404.xx an SIPLACE Anlagen
Workflow retrofit software version 404.xx at SIPLACE machines
14 of 16
1.Station
12 1,13t
Retrofit PCstand +
Changestation computer/
13 4h
WINNTinstallationat
Station
14 3h
Save MA-Dataat
2.Station
15 0,5h
Changeaxis epromat
2.Station
16 1h
Changehead epromat
2.Station
18 0,5h
SR/MC/SITESTinstallation
at Station
19 2h
Changevision epromat
2.Station
17 1h