00195044-14_UM_VisionTeachStation_DE EN.pdf - 第168页
9 Using the vision teach station on the SIPLACE LAN Vision Teach Station User Manual 9.4 Handling computers without an additional network card 05/2015 Edition 168 9 Fig. 9.4 - 4 Entry for the IP address and subnet mask I…
Vision Teach Station User Manual 9 Using the vision teach station on the SIPLACE LAN
05/2015 Edition 9.4 Handling computers without an additional network card
167
Fig. 9.4 - 3 Selecting the properties for TCP/IP
Enter an IP address from table 9.3 - 2, page 165 in the dialog that opens.
CAUTION: 9
If you have already assigned one of these IP addresses while you were installing XP, you
cannot use it again here. The XP installation has reserved the address for the network card,
even though it is not present.
Use another address from table 9.3 - 2, page 165 instead. 9
9 Using the vision teach station on the SIPLACE LAN Vision Teach Station User Manual
9.4 Handling computers without an additional network card 05/2015 Edition
168
9
Fig. 9.4 - 4 Entry for the IP address and subnet mask
If you need connections to both your company network and the SIPLACE LAN, please
contact SIPLACE Service. 9
Vision Teach Station User Manual 10 Exchange of data between the vision teach station and the production line
05/2015 Edition 10.1 Package form descriptions
169
10 Exchange of data between the vision
teach station and the production line
NOTE:
To ensure a smooth exchange of data, the SIPLACE Pro version on the vision teach station
should be the same as the version on the production lines, otherwise the exchange may be limited
or not possible at all. 10
10.1 Package form descriptions
10.1.1 Exchanging data by XML export/import
In the previous versions of the vision teach station, it was only possible to exchange data by me-
ans of an XML export. The XML export is described in detail in the "Guideline for
XML Export - Import.pdf" document (see the "SIPLACE Pro Application" setup CD in the "Docu-
mentation" directory).
NOTE:
If you want to transfer a component shape that was generated on the vision teach station to the
production line, the SIPLACE Pro version on the vision teach station must be the same as or ear-
lier than the version used in production. 10
10.1.2 Access via the SIPLACE LAN
From vision teach station version V3.51you can work directly on the database for a production line
via the SIPLACE LAN, provided that SIPLACE Pro 5.0 SP1 or later is installed on the LAN. The
following rules apply:
Tab. 10.1 - 1 Whether a package form can be edited during access via the SIPLACE LAN
SIPLACE Pro version:
vision teach station and line Behavior
VTS = Line Can be edited without restriction
VTS > Line
Features that are supported by the later VTS version cannot be
saved to the SIPLACE Pro database on the line.
VTS < Line
If a package form contains features that the VTS does not recog-
nize, this package form cannot be edited.