00197737-07_IM_WES7_DE_EN.pdf - 第13页

Windows Embedd ed Standard 7 / Inst allation Manual 12/2017 Edition 13 4.3 Installing the Windows Embedde d Standard 7 Opera ting System NOTICE Before you start wo rk, ensure that t he DVD drive is set as the first boot …

Windows Embedded Standard 7 / Installation Manual 12/2017 Edition

4.2.2 BIOS Settings for SIMATIC BoxPCs 627C / 827C

► Set the following values in BIOS:

Under Power:

Wake up on PME/LAN 2 [ Disabled ]

Under Boot:

USB-Boot [ Enabled ]

Under Boot / Legacy Boot Type Order the following boot priority sequence:

1: USB ODD

2: SATA0 HDD

3: ...

Under Advanced / CPU-configuration:

CMP-Support (= Core Multi Processing)

[ Auto ]

► Perform the following items unter Exit successively:

► Confirm Save User Profile with [Yes].

► Confirm Load User Profile with [Yes].

► Exit BIOS with Exit / Exit saving changes / Yes.

4.2.3 BIOS Settings for SIMATIC BoxPC 627D / 827D

All required settings have been set by default (factory settings).

4.2.4 BIOS Settings for iBASE PCs

All required settings have been set by default (factory settings).

4.2.5 BIOS Settings for SIMATIC MicroBox 427D

► Set the following values in BIOS for the TX-series placement machines:

Under Advanced / USB Configuration:

XHCI [Disabled] (= disabling USB 3.0)

Windows Embedded Standard 7 / Installation Manual 12/2017 Edition

4.3 Installing the Windows Embedded Standard 7 Operating System

NOTICE

Before you start work, ensure that the DVD drive is set as the first boot device in the

BIOS to allow the computer to be booted from DVD. When starting the computer from

DVD or USB stick, perhaps only one monitor is active.

► If necessary, back up the machine data manually.

► Follow the instructions in the respective Assembly Instruction for the 3D Coplanarity Module,

item no:s. [00195344-xx] (for X-series), [00196842-xx] (for SX1/SX2) and [00197395-xx] (for

X-series S) or the instructions in the Operating Manual for BulkFeeder X, item no. [00198045-

xx] if you install Windows Embedded Standard 7 on a Coplan or BulkFeeder X computer.

4.3.1 Installing from DVD

► Insert the "Win.Emb.Std.7" installation DVD suitable for the computer into the DVD drive.

► Switch on the computer to start it from the DVD or reboot the computer, if it was already

switched on.

► Press any key, when the message Press any key to boot from CD Rom is displayed.

► Follow the instructions of the Restore Installation procedure.

4.3.2 Installing from USB Stick

► Insert the USB stick in a USB interface on the computer.

► Switch on the computer or reboot the computer, if it was already switched on.

► Either adjust the boot sequence in the BIOS settings accordingly (key F2) or start the computer

from USB stick via the Boot menu (key Esc or key F12).

► Follow the instructions of the Restore Installation procedure.

Selection of Restore options:

If the system partition size is too small on the hard disk, it is only possible to delete and re-partition

the complete hard disk (message Complete hard disk recovery).

Windows Embedded Standard 7 / Installation Manual 12/2017 Edition

It the system partition is big enough, the Choose Recovery Option message is displayed and

one of the following options may be selected:

1. Restore existing system partition only

The system partition will be restored only.

2. Restore complete system disk

The complete hard disk will be restored.

► Select an option and confirm your selection with OK (or cancel your selection with Cancel).

The operating system is installed (may take some minutes) and thereafter the computer is

automatically rebooted several times.

When the Windows login window is displayed, the installation is completed (the first boot may take

some minutes).

► Log on as "ASM_Admin" and enter a password.

► If you install from DVD: Remove the DVD from the DVD drive.

► If you install from USB stick: Check if the "SIPLACE WES7 Configurator"

(e.g. directory _WES7_Configurator) is available for run on the USB stick under

Siplace_WES7_USB (please refer to section 4.3.3).

If not, release the USB stick and remove it from the USB interface.

► For the newer computers (iBASE, Microbox 427D) with two monitor outputs, the Clone

Displays operating mode has to be set in the display properties under Display – Multiple

Display, if required. Otherwise it might happen that only one monitor is accessed or the task

bar is only available on one of the monitors. This setting can also be made in the SIPLACE

Windows Embedded Standard 7 Configurator with the Add-ons and Touch Screen Driver

button.

► Additionally, it may be necessary to set the "Screen resolution" to 1024 x 768

(for E-series: 1280 x 1024) and enable the Scale Full Screen setting in the display

properties.under Panel Fit.

4.3.3 Choosing the Computer Configuration

► If you use the CD: Insert the "SIPLACE WES7 Configurator" software CD into the DVD drive.

► Open Windows Explorer and navigate to the DVD drive or open the directory (e.g. directory

_WES7_Configurator) that contains the "SIPLACE WES7 Configurator" on the USB stick

(removable disk name: Siplace_WES7_USB).

► Double-click on the start.hta file from the software CD or from the USB stick to start the

"SIPLACE Windows Embedded Standard 7 Configurator".