JUKI FX-3R Maintenance Manual.pdf - 第3页
Repla cing the H ead M ain B oard Repl acing the Z T-D river Boa rd Repl acing the O CC Asse mbl y Repl acing the C CD Cam era and L ens Repl acing the O CC Coax ial/A ngle Light Boar d Ass emb lies Repl acing the L ens …
Replacing the Cable Bear
Replacing the X-Axis Cable Bear
Replacing the Y-Axis Cable Bear
Replacing the Roller Lubrication Part
Replacing and Adjusting the Head
Replacing the Motor
Replacing the Z-Motor
Replacing the θ-Motor
Replacing the Laser Sensor (LNC60)
Replacing the Head Up Cylinder
Replacing the Belts
Replacing the Timing Belt Z
Replacing the Timing Belt θ
Replacing the Z-Slide Shaft
Readjustment After Replacement of Head Unit
Replacing the Solenoid Valves
Replacing the Filter
Replacing the Bad Mark Sensor
Sensor Assembly
Adjusting the Sensor Height
Amplifier
Assembling the Fiber Unit to the Amplifier
Amplifier Setting
Manual Setting Method for the F70R Fiber Sensor Amplifier
Replacing the HMS
Replacing the HMS Head
Replacing the Amplifier
Sticking the Label
Adjusting the HMS Height
Replacing the Head Board
Replacing the Head Main Board
Replacing the ZT-Driver Board
Replacing the OCC Assembly
Replacing the CCD Camera and Lens
Replacing the OCC Coaxial/Angle Light Board Assemblies
Replacing the Lens Filter
Adjusting the Focus
Adjusting the OCC Light Quantity
Replacing the Solder Recognition Light Board
Readjustment After Replacement of OCC Unit
Replacing the Transport Belt
Replacing the Transport Pulley
Transport Pulley A Assembly: E21117150A0
Replacing the STATION, IN, OUT, and JOINT Motors
Replacing the IN and OUT Sensors
Replacing the WAIT, STOP, and C-OUT Sensors
Replacing the Fiber
Replacing the Amplifier Unit
Adjusting the Sensitivity of the WAIT/STOP/C-OUT Sensor
Replacing the Stopper Cylinder
Replacing the Support Table Home Position Sensor (BU Home
Position Sensor)
Replacing the T-PIN Sensor (Optional)
Replacing the Pusher Y Cylinder (Outer Shape Reference)
Replacing the Centering Pin (Optional)
Replacing the Support Table Motor (BU Motor)
Adjusting the Gap between Torque Supporter and Support Motor
Adjusting the Tension of the Support Table Driving Timing Belt
Placing the Support Table Surface Horizontally
Replacing the Support Table ENC
Replacing the Backup Stopper (for EN Type Only)
Auto PWB Width Adjustment
Replacing the AWC Motor
Replacing the AWC Origin Sensor
Replacing the Transport Stopper Interference Sensor
Replacing the Barcode Reader (On-Demand Production, Option for
SCS)
Replacing the CAL Board Assembly
Replacing the Air Cylinder
Replacing the ATC OPEN and CLOSE Sensors
Adjusting the Speed Controller
Common Parts and Units for Mechanical Feeder and Electric Feeder
Replacing the Bank-Up Cylinder
Adjusting the Speed Controller of the Bank-Up Cylinder (Optional
Replacement Table)
Replacing the Bank-Up Detection Sensor (Optional Replacement Table)
Replacing the Selector Switch (Optional Replacement Table)
Replacing the Roller Lever (Optional Replacement Table)
Replacing the Cables and Connectors of Replacement Table (For Intelli
trolley)
Replacing the Antenna of the Replacement Table (For Intelli trolley)
Bank and Replacement Table for Mechanical Feeder
Overall Drawing
8-2.2. Replacing the Drive Cylinder
Adjusting the Speed Controller of the Drive Cylinder
Replacing the Feeder Bank Board (Optional)
Replacing the Bank PCB
Replacement Table for Electric Feeder
Overall Drawing (Replacement Table for ETF)