00197543-01_SM_JTF-S_ JTF-M_en.pdf - 第53页
Service Works 2.6.2 Elevator Bar Alignment Procedure Setup and Adjustments Bas e Unit Service Manual SIPLACE JEDEC Tray Feeder 53 Incorrect - Elevator bars not at same level The alignment pins contact the e levator bar o…
Service Works
Setup and Adjustments Base Unit 2.6.2 Elevator Bar Alignment Procedure
52 Service Manual SIPLACE JEDEC Tray Feeder
Slip clutch elevator
1. Slip clutch
Elevator bar alignment pins - Correct alignment
1. Correct: The alignment pins contact four points on the
elevator bars at the same time.
Service Works
2.6.2 Elevator Bar Alignment Procedure Setup and Adjustments Base Unit
Service Manual SIPLACE JEDEC Tray Feeder 53
Incorrect - Elevator bars not at same level
The alignment pins contact the elevator bar on this side.
1. Incorrect: The alignment pins do not contact the ele-
vator bar on this side.
Incorrect - Elevator bar is not level
1. Alignment pin contacts elevator bar.
2. Incorrect : Alignment pin does not contact.
Service Works
Setup and Adjustments Base Unit 2.6.2 Elevator Bar Alignment Procedure
54 Service Manual SIPLACE JEDEC Tray Feeder
Adjusting couplings
1. Couplings
2. Loosen coupling with 2mm hex wrench.
Adjusting chain tension
1. Chain tensioning adjustment screws use a 2.5 mm
hex wrench.