Service Manual HS60.pdf - 第35页
Se rv ice M a nu al HS-6 0 2 Ope rati on al saf et y 03/ 200 3 U S Iss ue 2.3 Laser clas sifica tio n 33 2.3. 4 Sa fety ins truction s for c losing the protectiv e covers T o prevent any risk of injury when the protectiv…
2 Operational safety Service Manual HS-60
2.3 Laser classification 03/2003 US Issue
32
2.3.3 Laser class 2
The following modules are assigned to laser class 2:
– Laser light barrier, placement area 1 in the PCB conveyor
– Laser light barrier, placement area 2 in the PCB conveyor
– PCB barcode scanner
2
2
Laser radiation
Do not look into beam!
Service Manual HS-60 2 Operational safety
03/2003 US Issue 2.3 Laser classification
33
2.3.4 Safety instructions for closing the protective covers
To prevent any risk of injury when the protective covers on automatic placement machines are
closed, the owner must instruct his operators to use the protective covers exactly as specified in
the following instructions. 2
CAUTION RISK OF CRUSHING HANDS 2
IF THE PROTECTIVE COVERS AREOPENEDOR CLOSEDI NCORRECTLY
Fig. 2.3 - 1 Safety instructions for closing the protective covers
(1) Protective covers
(2) Recessed grips
Æ When opening or closing the protective covers, always hold the covers by the recessed grips.
If the shock absorbing capacity of the protective covers reduces over time, for example, your
hands can easily be crushed if you do not close the covers using the recessed grips.
2 Operational safety Service Manual HS-60
2.3 Laser classification 03/2003 US Issue
34
2.3.5 Safety instructions for docking and undocking the component trolley
.
Fig. 2.3 - 2 Safety instructions on the component trolley
WARNING 2
Never reach into the gaps between the component trolley and the placement system frame while
the machine is running (item 1 in Fig. 2.3 - 2).
WARNING 2
The power cable for the component trolley must not be connected to the machine socket, or
pulled out of it, unless the component trolley is docked on the machine (Pos. 2 in Fig. 2.3 - 2).
(1) Vertical gap between the placement system frame and the component trolley
(2) Plug for connecting the component trolley cable
(3) Connecting cable for compressed air and main power supply to the component trolley