TM3011.Simultaneous switching operator setting both of the front and rear.pdf - 第3页
SMT Software En gineering Group IMOperations YAMAHAMOTORCO.,LTD. 3/8 2. Outli ne This document describes about the function "Simultaneous switchi ng operator setting both of the f ront an d rear…
SMT Software Engineering Group
IMOperationsYAMAHAMOTORCO.,LTD.
2/8
1. The target model and the target version
The target model and the target version of this specification are as follows.
Table1 Target Machine and Software
Machine, Software Version Remarks
IT-System Server Utility V1.26STD R1.000 or later
VGOSV3 Mounter Application Software V3.26STD R1.000 or later
SMT Software Engineering Group
IMOperationsYAMAHAMOTORCO.,LTD.
3/8
2. Outline
This document describes about the function "Simultaneous switching operator setting both of
the front and rear” (hereafter “This function”), which is added to "Setup Verification" of IT
option.
In this function, when an operator is selected on one side of the machine as follows, it works
on the other side as well.
- Press [Operator] button to select an operator on the front or rear side of the machine.
- Scan the operator ID barcode with a barcode reader on the front or rear side of the
machine.
3. Detail
3.1. Operator switch by operator selection
When an operator is selected on the front or rear side of the machine, it works on the other
side as well.
1. Press "Operator" button.
SMT Software Engineering Group
IMOperationsYAMAHAMOTORCO.,LTD.
4/8
2. Select the operator and press the "OK" button.
3. Both of the front and rear sides of the machine switched into the selected operator.
When "Operator Level Time Limit" is effective, both sides of operators return to "Returning
operator name" at the same time.