TM3011.Simultaneous switching operator setting both of the front and rear.pdf - 第4页
SMT Software En gineering Group IMOperations YAMAHAMOTORCO.,LTD. 4/8 2. Select the oper ator and press the "O K" button. 3. Both of the f r ont and rear s ides of the m achine switched into…
SMT Software Engineering Group
IMOperationsYAMAHAMOTORCO.,LTD.
3/8
2. Outline
This document describes about the function "Simultaneous switching operator setting both of
the front and rear” (hereafter “This function”), which is added to "Setup Verification" of IT
option.
In this function, when an operator is selected on one side of the machine as follows, it works
on the other side as well.
- Press [Operator] button to select an operator on the front or rear side of the machine.
- Scan the operator ID barcode with a barcode reader on the front or rear side of the
machine.
3. Detail
3.1. Operator switch by operator selection
When an operator is selected on the front or rear side of the machine, it works on the other
side as well.
1. Press "Operator" button.
SMT Software Engineering Group
IMOperationsYAMAHAMOTORCO.,LTD.
4/8
2. Select the operator and press the "OK" button.
3. Both of the front and rear sides of the machine switched into the selected operator.
When "Operator Level Time Limit" is effective, both sides of operators return to "Returning
operator name" at the same time.
SMT Software Engineering Group
IMOperationsYAMAHAMOTORCO.,LTD.
5/8
3.2. Operator switch by operator ID scanning
Both of the front and rear side operators are switched when you scan the operator ID on one
side with the handy barcode reader for Setup Verification.
1. It is the screen before the operator switched.
2. Scan operator ID barcode.
Operator
Operator ID barcode
Scan operator ID barcode with the handy barcode
reader for Setup Verification.