00194585_Installation_Manual_EDM_en.pdf - 第50页

Installation Manual, SIPLACE EDM Version 1.1 Issue 07/2005 VDM Blob extension 5.3.3 5.3.4 The VDM Blob extension is started in another branc h of the client workflow configuration. No changes should be made in this secti…

100%1 / 64
Installation Manual SIPLACE EDM Version 1.1 Issue 07/2005
Key
Request template
list
Transition:
getTemplateList
Fixed template
Transition:
useTemplate
clientIdle
pullData
Select template
Transition:
selectTemplate
waitTemplate
Fixed objects
Transition:
useIdentities
Process template
Transition:
handleTemplate
Select objects
Transition:
selectIdentities
selectObjects
waitData
Import objects
Transition:
importData
done
State
Transition
Alternative
modules
Additional
configuration
necessary
VDM for
component
shape
Import objects
Transition:
importDataVdm
Figure 15 Current configuration options for client workflows
49 of 64
Installation Manual, SIPLACE EDM Version 1.1 Issue 07/2005
VDM Blob extension 5.3.3
5.3.4
The VDM Blob extension is started in another branch of the client workflow configuration. No
changes should be made in this section. To obtain detailed information, refer to the comments at
this location in the configuration file itself.
Default configuration
See 7.2. ClientWorkflow.xml
50 of 64
Installation Manual SIPLACE EDM Version 1.1 Issue 07/2005
5.4 EDM configuration
Application templates 5.4.1
As already mentioned, the application templates depict the static part of the customer process that is
related to the data. They primarily define the object types to be transferred and whether or not they
will be overwritten.
5.4.1.1 General settings
Figure 16 General settings for application templates
The general settings include:
• Type of data transfer. Currently, you can only select “Pull Mode” or “Forced Pull Mode”.
• Starting Point specifies the object type for which this template is valid. A template can only be
valid for one object type at a time, though. It is possible, of course, to define more than one
template for an object type.
• Objects found in the default folder and all its subdirectories for the data transfer from the master
can be specified later on by the line engineer.
51 of 64