00195334-01.pdf - 第20页
2 Retrofit instructions internal Conveyor control T SP200 in machine no.: 1-20 SIPLACE HS-50 HS-50 transport controller 08/2000 Edition 20 2.6 Att aching the TSP in sector 1 : Use the base plate as a drilling temp late a…
HS-50 transport controller 2 Retrofit instructions internal Conveyor control TSP200 in machine no.: 1-20 SIPLACE HS-50
08/2000 Edition
19
2
Fig. 2.5.2 TSP without conversion board
Fig. 2.5 - 3 Conversion board
2 Retrofit instructions internal Conveyor control TSP200 in machine no.: 1-20 SIPLACE HS-50 HS-50 transport controller
08/2000 Edition
20
2.6 Attaching the TSP in sector 1
: Use the base plate as a drilling template and mark the drilling positions.
2
: Cover the area around the sector well to prevent steel swarf reaching the cable duct.
2
240 mm
340 mm
250 mm
HS-50 transport controller 2 Retrofit instructions internal Conveyor control TSP200 in machine no.: 1-20 SIPLACE HS-50
08/2000 Edition
21
: Mark the drilling positions with the prick punch.
: Drill, countersink and tap the thread.
: Remove the drilling cover.
: Screw the TSP200 firmly in place.
2
2
: Detach the power supply from the old conveyor control.
: Connect the power supply cable using connector X79 (cable comes from the main distribution
board, connector xdo8).
: Detach the power supply from the SLIO modules and remove connector xdo7 from the main
distribution board (no longer needed).
: Connect the grounding cable to the machine frame.
2
2
2
2