Besi JTF2 Traystak Feeder.pdf - 第43页

Retrofit instructions: Besi JTF2 (Traystak feeder) SIPLACE S-25 HM / S-27 HM / HS-50 / HS-60 / HF-series / X-series 11/2006 Edition 43 : Connect the T raysta k feeder to the communication interface on the componen t trol…

100%1 / 60
Retrofit instructions: Besi JTF2 (Traystak feeder) SIPLACE S-25 HM / S-27 HM / HS-50 / HS-60 / HF-series / X-series
11/2006 Edition
42
: Check that the Traystak feeder is seated correctly. There must be no gap between the Traystak
feeder and the adapter.
2
2
2
2
2
2
2
2
2
2
2
2
2
2
without gap
Retrofit instructions: Besi JTF2 (Traystak feeder) SIPLACE S-25 HM / S-27 HM / HS-50 / HS-60 / HF-series / X-series
11/2006 Edition
43
: Connect the Traystak feeder to the communication interface on the component trolley.
: Connect the air connection on the feeder to the air connection provided by the customer,
or
: Disconnect the compressed air hose from the compressed air supply for the component trolley.
: Fit a branch to connect the Traystak feeder to the compressed air as well.
2
2
: Tie all the hoses and cables together so that they cannot be damaged.
2
Branch
Connection for Traystak feeder
Compressed air, component trolley
Retrofit instructions: Besi JTF2 (Traystak feeder) SIPLACE S-25 HM / S-27 HM / HS-50 / HS-60 / HF-series / X-series
11/2006 Edition
44
2.8 Retrofit the SIPLACE S-25 HM / S-27 HM
2.8.1 Work at the location
: Dock the component trolley out of the placement machine.
: Shut down the placement system and switch it off.
2
The nozzle changer and tape guide channel must be removed if more than 2 Traystak feeders are
fitted. 2
2
: If necessary, unscrew the hand guard beneath the left-hand safety door since it will no longer
close.
2
2
2
2
2
2 screws