Besi JTF2 Traystak Feeder.pdf - 第54页
Retrofit instructions: Besi JTF2 (Traystak feeder) SIPLAC E S-25 HM / S-27 HM / HS-50 / HS-60 / HF -series / X-series 11/2006 Edition 54 : Insert the standar d bar with some modified cover plate for the ODU connector . D…
Retrofit instructions: Besi JTF2 (Traystak feeder) SIPLACE S-25 HM / S-27 HM / HS-50 / HS-60 / HF-series / X-series
11/2006 Edition
53
: Fit the new tape guide channel together with the cover plate (left screw).
Tighten it with both screws left and right.
If necessary, tighten the cover plate on the right side with M5x8 screw.
2
2
2
2
2
2
2
2
2
2
2
2
2
Screws
Cover plate
M5x8 screw
Retrofit instructions: Besi JTF2 (Traystak feeder) SIPLACE S-25 HM / S-27 HM / HS-50 / HS-60 / HF-series / X-series
11/2006 Edition
54
: Insert the standard bar with some modified cover plate for the ODU connector. Do not screw it.
2
2
2
2
2
2
2
2
2
2
2
2
2
2
Bar
Cover plate
Retrofit instructions: Besi JTF2 (Traystak feeder) SIPLACE S-25 HM / S-27 HM / HS-50 / HS-60 / HF-series / X-series
11/2006 Edition
55
: Refit the component reject bin and cover plate.
If required, fit the carrier for the nozzle reject bin with reject device.
2
If you wish to use the nozzle reject device, do not deactivate the nozzle changer in the SITEST
program. If you do, the reject position will have to be recalibrated. 2
2
2
2
2
2
2
2
2
2
2
2