00198382-03_UM_SIPLACE-CA4-V2_EN.pdf - 第279页
Instruction manual SIPLACE CA4 V2 7 Station extensions From software version 713.0 Ed ition 12/2019 7.1 Nozzle changer 279 7 S t ation extensions For the relevant configuration s and other option s, refer to the individu…
6 Component handling Instruction manual SIPLACE CA4 V2
6.2 Component trolley From software version 713.0 Edition 12/2019
278
Instruction manual SIPLACE CA4 V2 7 Station extensions
From software version 713.0 Edition 12/2019 7.1 Nozzle changer
279
7 Station extensions
For the relevant configurations and other options, refer to the individual specifications for the SI-
PLACE placement machines.
7.1 Nozzle changer
The magazines are seated on a common support. They are centered with two parallel pins and
fixed in place with 4 push buttons. The exact position is determined with two fiducials on each
magazine. The correct seat of the magazines on the basic nozzle changer body is monitored by
microswitches, to prevent a collision of the placement head with any magazines projecting up-
wards. All magazine locations must be filled since the safety circuit stops the placement machine
in response to missing magazines or magazines that are not seated correctly.
7 Station extensions Instruction manual SIPLACE CA4 V2
7.1 Nozzle changer From software version 713.0 Edition 12/2019
280
7.1.1 Nozzle changer for SIPLACE SpeedStar C&P20 M2
7
7.1.1.1 Nozzle changer for C&P20 M2 with 6 magazines
Item no. 03103514-xx Nozzle changer basic assembly CP/all - long
Item no. 03101503-xx Nozzle changer for C&P20
7
Fig. 7.1 - 1 Nozzle changer for the SIPLACE SpeedStar C&P20 M2 with nozzle magazine
CAUTION
Only use this nozzle changer together with the SpeedStar.