stopper for HF-series for processing area 1.pdf - 第13页
SIPLACE 1 Assembly instructions Special design Stopper for placement area 1 (00166322-01) SIPLACE HF-series 06/2007 Edition 13 : Pull out the air hose like shown on the pictures belo w . 1 1
1 Assembly instructions Special design Stopper for placement area 1 (00166322-01) SIPLACE HF-series SIPLACE
06/2007 Edition
12
: Run the cables and the hose like shown on the picture below.
1
1
: Twist the provided cable cover around the cables and hose from the end of the module until
the cables are about 10 cm in the cable trench.
1
SIPLACE 1 Assembly instructions Special design Stopper for placement area 1 (00166322-01) SIPLACE HF-series
06/2007 Edition
13
: Pull out the air hose like shown on the pictures below.
1
1
1 Assembly instructions Special design Stopper for placement area 1 (00166322-01) SIPLACE HF-series SIPLACE
06/2007 Edition
14
: Disconnect the existing 4mm hose on the right side of the air-splitter and reconnect the hoses
with the provided branch as shown below. The picture shows the connection for single trans-
port, for dual transport use the second branch to get 2 air-supplies.
1
1
1
1
1
1
Existing hose
Branch
New hose to stopper
Existing hose
New hose to stopper
Branch
Air splitter