Vision_Serie_EN_2023.pdf - 第15页

15 Opened vacuum chamber of the VisionXP+ Vac Divided, separately regulated tr anspor t system The systems with vacuum chamber are equiped with atripar - tite transport system: pre-heating/peak area, vacuum unit and cool…

2-in-1solution for reow soldering

VisionXP+ with or without vacuum

Energy-efcient, low-maintenance and void-free - with the Vision TripleX, we offer an innovative solution for reow sol-

dering. The combination of vacuum unit and condensation soldering process in only one system provides undreamt-of

possibilities!

Vision TripleX is a patented new development in the eld of convection and vapour phase soldering. The system is based

on the reow convection soldering systems of the Vision series and combines the convection soldering process with the

proven vapour phase soldering process of the Condenso series. Thus, three processes can be run in the Vision TripleX:

Reow convection soldering with and without vacuum as well as vapour phase soldering using Galden

. This offers

uniquely exible manufacturing options.

3-in-1: The combination of classical convection soldering, convection soldering

under vacuum and condensation soldering in only one system

Flexible temperature proling due to the combination of convection and condensation,

in combination with the applicable atmosphere (air, N2 and/or Galden

)

High quality solder joints on assemblies with large differences in

thermal mass

Compared to existing Condenso systems, the Vision TripleX requires no additional

carrier is necessary

Opened vacuum chamber of the VisionXP+ Vac

Divided, separately regulated transport system

The systems with vacuum chamber are equiped with atripar-

tite transport system: pre-heating/peak area, vacuum unit

and cooling zone. All three areas of the transport system can

be optionally equipped with a central support for particularly

wide boards. The possibility of reducing the transportation

speed in the cooling zone when using the vacuum enables

the extension of the cooling time of components and there-

fore guarantees an optimum temperature for subsequent

process steps. The throughput of the system is additionally

increased with the expansion of the transport system by a

second track.

The vacuum chamber is installed as an enhancement to the

available peak zones. The integrated pyrolysis and sepa-

rate ltering of the atmosphere extracted from the vacuum

chamber are additional plus points in terms of maintenance

and cleaning. A generously dimensioned opening angle of the

vacuum chamber in the service position enables good access

to the internal mechanisms during maintenance periods.

All heating zones are regulated individually and separated

from each other thermally, guaranteeing exible prole

guidance and a stable reow process. The measurement

of a temperature prole with the vacuum process switched

on shows that despite a very low vacuum < 10 mbar, all

prole settings have been fullled (≤ 3 K/s heating, tL ≤ 90

s, TP ≤ 240 °C). With the help of the heating integrated into

the chamber, the temperature of the components inside

the vacuum unit can be adapted to the settings of the most

common standards. This rened solution ensures a time-

efcient and stable production process.

Efcient, easy to maintain and void-free

Precise pressure and temperature proling

Pressure and temperature prole of a soldering

process with the VisionXP+ Vac

without vacuum

with vacuum

valid for VisionXP+ Vac and Vision Triplex

Vision-Series | Vacuum

ViCON

Vision

1. Alarms

The top area of the screen gives you a clear

overview where you can view, interpret and

edit alarm messages.

4. Machine view

The machine view offers an overview of the

modular construction of your system, the

current loading situation and the status of the

process zones.

2. Favourites bar

In the favourites bar you can view selected

values. This then appears on the main screen

and on every page in the dened position.

5. Options

Machine options can be set depending on the

system equipment. For this there are up to ten

different options available for your manufac-

turing process.

3. Status bar

Colour-contrasting markings in the status

bar provide you with information on the

operating mode of the system.

6. Display area

The display area shows you all prole

parameter actual values, e.g. temperature

and lters.