Danfoss_OMT_Series_Technical_Data.pdf - 第6页
• Forestry equipment • Lawn and turf equipment • Machine tools and stationary equipment • Marine equipment • Special purpose Orbital Motors Literature Overview A general catalog of all Orbital Motors with technical data …
Orbital Motors Introduction
Danfoss is a world leader within production of low speed orbital motors with high torque. We can offer
more than 1500 different orbital motors, categorized in types, variants and sizes (including different shaft
versions).
The motors size vary (rated displacement) from 130 to 800 cm
3
[7.9 to 48.9 in
3
] per revolution.
•
Motor sizes:
‒
OMT and OMV
‒
TMK
‒
TMT
‒
TMTHW
‒
TMVW
Speeds range up to approximate 600 min
-1
(rpm).
Maximum operating torques up to 3400 N•m [30090 lb•in] (peak) and maximum outputs up to 70 kW [95
hp].
Orbital Motors Features
•
Smooth running over the entire speed range
•
Constant operating torque over a wide speed range
•
High starting torque
•
High return pressure without the use of drain line (high pressure shaft seal)
•
High efficiency
•
High radial and axial bearing capacity
•
Long life under extreme operating conditions
•
Robust and compact design
•
For applications in both open and closed loop hydraulic systems
•
Suitable for a wide variety of hydraulics fluids
Technical Features
The program is characterized by technical features appealing to a large number of applications and by
motors that can be adapted to a given application.
Adaptions comprise the following variants:
•
Motors with:
‒
integrated negative holding brake
‒
speed sensor
‒
black finish paint
•
Short motors without bearings or Ultra short motors
•
Wheel motors with recessed mounting flange
Orbital Motors Application Areas
The orbital motors are used in the following application areas:
•
Construction equipment
•
Agricultural equipment
•
Material handling & Lifting equipment
Technical Information
OMT and OMV Orbital Motors
Orbital motors
©
Danfoss | September 2021 BC152886483862en-000801 | 5
•
Forestry equipment
•
Lawn and turf equipment
•
Machine tools and stationary equipment
•
Marine equipment
•
Special purpose
Orbital Motors Literature Overview
A general catalog of all Orbital Motors with technical data gives a quick motor reference based on:
selection of orbital motor, function in hydraulic systems, power, torque, speed and capabilities. More
detailed information can be found in an individual motor catalogs.
Literature title Literature type Reference number
Orbital Motors in General Technical Information BC152886483554
OMT and OMV Orbital Motors Technical Information BC152886483862
TMK, TMKW, TMK FL Orbital Motors Technical Information BC152886483785
TMT, TMTU, TMTW, TMT FL Orbital Motors Technical Information BC152886483631
TMTHW Orbital Motors Technical Information BC152986483537
Technical Information
OMT and OMV Orbital Motors
Orbital motors
6 |
©
Danfoss | September 2021 BC152886483862en-000801
Speed, torque, and output
Maximum speed
160 200 250 315 400 500 315 400 500 630 800
800
600
400
200
OMT OMV
min
-1
(rpm)
Maximum torque
160 200 250 315 400 500 315 400 500 630 800
22000
20000
18000
16000
14000
12000
10000
8000
6000
4000
2000
2400
2200
2000
1800
1600
1400
1200
1000
800
600
400
200
lbf•in N•m
Maximum output
160 200 250 315 400 500 315 400 500 630 800
80
60
40
20
60
50
40
30
20
10
OMT
OMV
hp kW
1 2
1. Intermittend values
2. Continuous values
The bar diagrams above are useful for a quick selection of relevant motor size for the application. The
final motor size can be determined by using the function diagram for each motor size: see OMT Function
diagrams on page 14, or OMV function diagrams on page 45.
The function diagrams are based on actual tests on a representative number of motors from our
production. The diagrams apply to a return pressure between 5 and 10 bar [75 and 150 psi] when using
mineral based hydraulic oil with a viscosity of 35 mm
2
/s [165 SUS] and a temperature of 50°C [120°F].
Technical Information
OMT and OMV Orbital Motors
Orbital motors
©
Danfoss | September 2021 BC152886483862en-000801 | 7