TM2817.Improvement of Parts Dump Function on resetting operations.pdf - 第6页

Y AMAHA MOTO R CO.,L T D IM Company SMT Eng ineering Group MDOC-SOFT50103 6/9 ▼ Case 3 ・ Set “Sp.Dump Back” for Dum p Way on board data.  Set [S p.Dum p Back ] on [Parts] - [Basic] - [Dum p Way]    fig ： 4- 2.  Set …

100%1 / 9
YAMAHA MOTOR CO.,LTD IM Company
SMT Engineering Group
MDOC-SOFT50103
5/9
4. How to set up
▼Case 1, 2, 4
・Set “Recovery Unit” for [Dump Way] on board data.
Set [Recovery Unit] on [Parts] - [Basic] - [Dump Way]※
(※ Set ”Recovery Pallet” when you use Dump Station or Recovery Pallet.)
fig：4-1.Setting of Dump Way（Recovery Pallet）
[Parts] – [Basic] – [Dump Way]
YAMAHA MOTOR CO.,LTD IM Company
SMT Engineering Group
MDOC-SOFT50103
6/9
▼Case 3
・Set “Sp.Dump Back” for Dump Way on board data.
Set [Sp.Dump Back] on [Parts] - [Basic] - [Dump Way]
fig：4-2. Setting of Dump Way（Sp.Dump Back）
[Parts] – [Basic] – [Dump Way]
YAMAHA MOTOR CO.,LTD IM Company
SMT Engineering Group
MDOC-SOFT50103
7/9
▼Checking of the Dump Station equipment
Check Dump Station is “Exist” before starting auto-running.
fig：4-3. Setting of Dump Station
[Machine] ->[Setting] – [Machine Information] – [Option Setting] – [Dump Station]
･Check Dump Station is correctly connected with the machine.
･Take parts out of Dump Station if the station is full.