TM2817.Improvement of Parts Dump Function on resetting operations.pdf - 第7页
Y AMAHA MOTO R CO.,L T D IM Company SMT Eng ineering Group MDOC-SOFT50103 7/9 ▼ Checking of the Dum p S tation equipment Check Dump S tation is “Exi st” before s tarting auto- running. fig ： 4- 3. Setting of Du…
YAMAHA MOTOR CO.,LTD IM Company
SMT Engineering Group
MDOC-SOFT50103
6/9
▼Case 3
・Set “Sp.Dump Back” for Dump Way on board data.
Set [Sp.Dump Back] on [Parts] - [Basic] - [Dump Way]
fig：4-2. Setting of Dump Way（Sp.Dump Back）
[Parts] – [Basic] – [Dump Way]
YAMAHA MOTOR CO.,LTD IM Company
SMT Engineering Group
MDOC-SOFT50103
7/9
▼Checking of the Dump Station equipment
Check Dump Station is “Exist” before starting auto-running.
fig：4-3. Setting of Dump Station
[Machine] -> [Setting] – [Machine Information] – [Option Setting] – [Dump Station]
･Check Dump Station is correctly connected with the machine.
･Take parts out of Dump Station if the station is full.
YAMAHA MOTOR CO.,LTD IM Company
SMT Engineering Group
MDOC-SOFT50103
8/9
▼Checking of the Recovery Pallet equipment
Check Recovery Pallet is “Exist” before starting auto-running.
fig：4-4.SettingofRecoveryPallet
[Machine]-> [Setting]–[MachineInformation]–[InstallationSetting]–[RecoveryPallet]
･Check Recovery Pallet is correctly connected with Tray Part Supply Unit.
･Take parts out of Recovery Pallet if the pallet is full.