7OM-1603-006_w.pdf - 第5页
2 1 102-002 About the Instruction Manual This instruction manual is divided into the following eight volumes (booklets) on subjective basis. V olume 1 : Guide This describes the basic usage of the machine and is prepared…
11007-003
Before Use
We are grateful to you for purchasing our multi-layer tray feeder (GS-FP100/200) for the
Hitachi modular mounter (Chip Mounter).
This product is used to supply the tray components onto the chip mounter SIGMA-G4/
G5. (The installation of GS-FP200 (Full-size Multi-Layer Tray Feeder) onto SIGMA-G4
is not available).
This instruction manual describes the functions, handling, and operations of the multi-
layer tray feeder for those who have nished the basic training of the chip mounter.
Before operating the machine, please read this instruction manual carefully to fully
understand the instructions and precautionary measures for safety purposes.
After reading this instruction manual, be sure to keep it at hand for your quick reference.
7OM-1603
21102-002
About the Instruction Manual
This instruction manual is divided into the following eight volumes (booklets) on subjective
basis.
Volume 1 : Guide
This describes the basic usage of the machine and is prepared for those who will read this
manual for the rst time or have never used any modular mounter.
[Coverage]
"Checking Items", "Safety Precautions", "Guide Map for Machine and Operations",
"Functions", "Procedures from Preparation to Completion of Automatic Operation",
and "Specications"
Volume 2 : Product & Set-up Menu
This describes the product menu and setup menu for those who have read "Volume 1:
Guide".
[Coverage]
"Checking Items", "Safety Precautions", "Automatic Operation", "Program/ Product
Change Operations", "Pattern Programs", "Manage Data", etc.
Volume 3 : Maintenance Menu
This describes the maintenance menu for those who have read "Volume 1: Guide".
[Coverage]
"Checking Items", "Safety Precautions", "Device Check", "Various Operations",
"Shipment Adjust", "System Setting", etc.
Volume 4 : Maintenance & Troubleshooting
This describes the periodic maintenance and troubleshooting for the machine operators.
[Coverage]
"Checking Items", "Safety Precautions", "Periodic Maintenance", "List of
Consumables and Servicing Parts", "Remedial Measures after "ERROR" Window",
etc.
Volume 5 : Pneumatic and Machine Diagrams
This provides various kinds of material such as pneumatic and electrical circuit diagrams,
etc.
[Coverage]
"Checking Items", "Safety Precautions", "Pneumatic Diagrams", "Parts Location",
"Electrical Circuit Diagrams", etc.
7OM-1603
31102-002
Volume 6 : Component Library
This includes an explanation of component library data and how to create it.
Volume 7 : Multi-Layer Tray Feeder
This section describes the multi-layer tray feeder and operation procedure.
Volume 8 : Recycle Conveyor
This section describes the recycle conveyor and operation procedure.
First of all, please read the paragraphs in "Caution and Warning" and "Safety Precautions"
(rst part of this manual).
7OM-1603