OPTIONEN-EN-ZEVAC-Flyer.pdf - 第5页

OPTIONS FOR COMPONENT / PCB H ANDLING NOZZLE CHANGER A Nozzle Changer can be provided t o accommodate different t ools or nozzles as part of the automated process cycle. PICKUP SHUTTLE MANUAL ONYX 21, 24, 25 The Pickup S…

100%1 / 8
4
OPTIONS FOR PROFILE AND TEMPERATURE CONTROL
OPTIONS FOR COMPONENT / PCB HANDLING
Order no.:
50.29.124
Order no.:
50.29.186
Order no.:
see on rear side
TWO-ZONES PREHEATER 245 x 490 MM
3000 W (2 x 1500 W) Preheater with a
size of 245 x 490mm.
FOUR-ZONE PREHEATER 490 x 490 MM
Standard equipment on the ONYX 29.
6000 W (4 x 1500 W) Preheater with a
size of 490 x 490 mm.
PREHEATER 310 x 350 MM
3260 W Preheater with a size of
310 x 350 mm.
Supplied as an alternative to the standard
preheater on the ONYX 21, 24, 25.
Recommended for use multi-layer circuit
boards.
Order no.:
50.25.163 50.29.156
Order no.:
50.29.141
Order no. 1st unit:
50.21.041 50.24.657 50.25.152 50.29.190
Order no. 2nd unit:
50.25.153
ADAPTORS AND ACCESSORIES
For use with the Bridge Tray, Shuttle
or with Nozzle Changer. Various
accessories are available.
1 = Component Reject Bin (l)
2 = Tray Plate for Bridge Tray (k)
3 = Adaptor Plate for Nozzle Changer (i)
4 = Insertion Tool (a-f)
5 = Adaptor Plate for Bridge Tray (j)
BRIDGE TRAY
The Bridge Tray is used to mount
Insertion Tool and Reject Bin, Fluxing
accessories and other ancillary
equipment.
ELEVATED BRIDGE TRAY
Provides increased above board
clearance allowing use of the full area of
the preheater.
1 2
34
5
OPTIONS FOR COMPONENT / PCB HANDLING
NOZZLE CHANGER
A Nozzle Changer can be provided to
accommodate different tools or nozzles
as part of the automated process cycle.
PICKUP SHUTTLE MANUAL
ONYX 21, 24, 25
The Pickup Shuttle Manual with an
integrated Force Sensor can be used
for semi-autmated pickup, dipping or
placement of components.
PICKUP SHUTTLE AUTOMATIC /
MANUAL ONYX 29
Fully automated loading, uxing or
unloading of components. Preparation
is completed manually outside of the
heated working area.
An adjustable Insertion Tool is available
in different sizes.
Order no. 1 unit (for 5 nozzles):
50.29.176
Order no. 2 units (for 10 nozzles):
50.29.177
Automated:
No. incl. insertion tool 4 - 45 mm: 50.29.172
No. incl. insertion tool 6 - 47 mm: 50.29.192
No. incl. insertion tool 9 - 56 mm: 50.29.173
Manual:
No. incl. insertion tool 4 - 45 mm: 50.29.170
No. incl. insertion tool 6 - 47 mm: 50.29.191
No. incl. insertion tool 9 - 56 mm: 50.29.171
Order no.:
50.21.006 50.24.646 50.25.105
Order no.:
50.21.025 50.24.658 50.25.154
Order no. version same level:
50.29.103
Order no. version elevated level:
50.29.163
Order no.:
50.21.024
SECOND BOARD HOLDER
Provides an additional working area. This
option is available with standard height
or additional above board clearence of
20mm.
BOARD HOLDER EXTENSION
Extends the ONYX 21 Board Holder
capacity in the Y axis by 100mm.
PICKUP TOOL SWIVELLING
Manually positioned under the nozzle,
this provides semi-automated pickup of
components.
5
6
OPTIONS FOR COMPONENT / PCB HANDLING
OPTIONS TO APPLY / REMOVE MEDIA
BOARD HOLDER CLAMPS / FINGERS
PCB Holder Clamps, Fingers and End
Stop can be used to rmly and accurately
locate the PCB in the Board Holder.
1 = Board Holder Clamp -10mm (2 pcs.)
(n)
2 = Borad Holder Clamp ONYX 21
(set of 4 pcs.) (o)
3 = Board End Stop (1 pce.) (p)
4 = Board Holder Finger (1 pce.) (m)
DIP FLUXER KIT FASET1
Fluxer Kit with a range of uxer plates for
various uxing applications.
See separate data sheet.
SITE CLEANING SYSTEM
This non-contact Site Cleaning System is
used to remove solder and ux residues
before placing a new component.
This option tracks the board surface
using non-contact vacuum control for
adjusting the Z height except when
installed on the ONYX 21 where the Z
height is constant.
Various suction tip forms are available on
request.
Order no.:
See on rear side
Order no.:
50.21.022 50.24.620 50.25.120 50.29.120
Order no.:
50.21.045 50.24.671 50.25.167 50.29.195
TIME / PRESSURE DISPENSER
To dispense solder paste, ux, adhesive
epoxy, underll or other uids.
PASTE ON DEVICE QFN
Used to screen solder paste onto the
underside of a component.
DIP FLUXER KIT
Fluxer Kit with Fluxer Plate Holder and
Squeegee.
Fluxer Plates with different depths are
available on request.
Kit contents:
1 = Fluxer Plate Holder
2 = Squeegee
Other accessories:
3 = Fluxer Plate (specify depth)
4 = Tray Plate for Bridge Tray (k)
Order no.:
50.21.036 50.24.663 50.25.159 50.29.183
Order no.:
50.29.104
Order no.:
50.21.029 50.24.660 50.25.156 50.29.181
1 23 4
1
2
3
4