OPTIONEN-EN-ZEVAC-Flyer.pdf - 第6页

6 OPTIONS FOR COMPONENT / PCB H ANDLING OPTIONS TO APPL Y / REMOVE MEDIA BOARD HOLDER CLAMPS / FINGERS PCB Holder Clamps, Fingers and End Stop can be used to rmly and accur ately locate the PCB in the Board Holder . 1 =…

100%1 / 8
OPTIONS FOR COMPONENT / PCB HANDLING
NOZZLE CHANGER
A Nozzle Changer can be provided to
accommodate different tools or nozzles
as part of the automated process cycle.
PICKUP SHUTTLE MANUAL
ONYX 21, 24, 25
The Pickup Shuttle Manual with an
integrated Force Sensor can be used
for semi-autmated pickup, dipping or
placement of components.
PICKUP SHUTTLE AUTOMATIC /
MANUAL ONYX 29
Fully automated loading, uxing or
unloading of components. Preparation
is completed manually outside of the
heated working area.
An adjustable Insertion Tool is available
in different sizes.
Order no. 1 unit (for 5 nozzles):
50.29.176
Order no. 2 units (for 10 nozzles):
50.29.177
Automated:
No. incl. insertion tool 4 - 45 mm: 50.29.172
No. incl. insertion tool 6 - 47 mm: 50.29.192
No. incl. insertion tool 9 - 56 mm: 50.29.173
Manual:
No. incl. insertion tool 4 - 45 mm: 50.29.170
No. incl. insertion tool 6 - 47 mm: 50.29.191
No. incl. insertion tool 9 - 56 mm: 50.29.171
Order no.:
50.21.006 50.24.646 50.25.105
Order no.:
50.21.025 50.24.658 50.25.154
Order no. version same level:
50.29.103
Order no. version elevated level:
50.29.163
Order no.:
50.21.024
SECOND BOARD HOLDER
Provides an additional working area. This
option is available with standard height
or additional above board clearence of
20mm.
BOARD HOLDER EXTENSION
Extends the ONYX 21 Board Holder
capacity in the Y axis by 100mm.
PICKUP TOOL SWIVELLING
Manually positioned under the nozzle,
this provides semi-automated pickup of
components.
5
6
OPTIONS FOR COMPONENT / PCB HANDLING
OPTIONS TO APPLY / REMOVE MEDIA
BOARD HOLDER CLAMPS / FINGERS
PCB Holder Clamps, Fingers and End
Stop can be used to rmly and accurately
locate the PCB in the Board Holder.
1 = Board Holder Clamp -10mm (2 pcs.)
(n)
2 = Borad Holder Clamp ONYX 21
(set of 4 pcs.) (o)
3 = Board End Stop (1 pce.) (p)
4 = Board Holder Finger (1 pce.) (m)
DIP FLUXER KIT FASET1
Fluxer Kit with a range of uxer plates for
various uxing applications.
See separate data sheet.
SITE CLEANING SYSTEM
This non-contact Site Cleaning System is
used to remove solder and ux residues
before placing a new component.
This option tracks the board surface
using non-contact vacuum control for
adjusting the Z height except when
installed on the ONYX 21 where the Z
height is constant.
Various suction tip forms are available on
request.
Order no.:
See on rear side
Order no.:
50.21.022 50.24.620 50.25.120 50.29.120
Order no.:
50.21.045 50.24.671 50.25.167 50.29.195
TIME / PRESSURE DISPENSER
To dispense solder paste, ux, adhesive
epoxy, underll or other uids.
PASTE ON DEVICE QFN
Used to screen solder paste onto the
underside of a component.
DIP FLUXER KIT
Fluxer Kit with Fluxer Plate Holder and
Squeegee.
Fluxer Plates with different depths are
available on request.
Kit contents:
1 = Fluxer Plate Holder
2 = Squeegee
Other accessories:
3 = Fluxer Plate (specify depth)
4 = Tray Plate for Bridge Tray (k)
Order no.:
50.21.036 50.24.663 50.25.159 50.29.183
Order no.:
50.29.104
Order no.:
50.21.029 50.24.660 50.25.156 50.29.181
1 23 4
1
2
3
4
7
OPTIONS TO APPLY / REMOVE MEDIA
OPTIONS FOR MACHINE / SOFTWARE
REBALLING TOOL
For reballing components. With the
precision and high level of automation
with the ONYX 29 BGA components can
be tted again with solder balls.
DIRECT VIEW CAMERA
Enables real time monitoring of the
machine process. The Camera is either
on an articulated arm that is table
mounted or on a machine mounted
holder. An LED light is available.
FUME EXTRACTION
The Fume Extraction System is mounted
to the machine head to collect the fumes
emitted during machine processes for
extraction by an external ltering system
(not included).
Order no.:
50.29.188
Order no.:
50.21.005 50.24.617 50.25.117 50.29.117
Order no. with machine holder:
50.24.651 50.25.141 50.29.161
Order no. with folding arm:
50.21.038 50.24.665 50.25.161 50.29.187
Order no. illumination:
50.21.009 50.24.644 50.25.144 50.29.144
ADVANCED SOFTWARE ACCESS
Providing extended Software Access
including explanation and training with
practical examples of:
• conguration and calibration of
peripherals
• creation and editing process lists
• multiple image / assembly
programming
TRACEABILITY LICENSE
A Traceability License can be provided
for management report documentation
and quality control.
MACHINE BENCH ESD
Machine Benche with ESD surfaces and
monitor stands are available for all ONYX
models to provide a rigid and stable
platform for the machine.
Order no. machine bech:
50.21.031 50.24.618 50.25.118 50.29.174
Order no. support bench:
50.21.032 50.24.639 50.25.139 50.29.139
Order no.:
50.21.047 50.24.635 50.25.124 50.29.107
Order no.:
50.32.190