SOM-1861-001.pdf - 第6页

Contents Page 3 AJYESO-P Before Use ............................................................................................... 1 Contents .............................................................................…

AJYESO-P0505-001 2

• Identifying Alert Icons

: This symbol mark represents danger or prompts warning.

: This symbol mark represents prohibited operations.

: This symbol mark represents forced operations or instructions.

• Identifying Icons in Manual

This icon represents an important precautionary or a regulatory

item.

This icon should be identified as an item required for correct operations

of the machine.

This icon prompts the operator to refer to the described item.

This icon prompts the operator to follow the described steps.

Note

Notice

Reference

Contents

Page

3 AJYESO-P

Before Use ............................................................................................... 1

Contents ................................................................................................... 3

1. Scope ................................................................................................ 4

2. Specifications.................................................................................... 4

3. Appearance of Machine .................................................................... 5

4. Attachment and Detachment of Detachable Plate ........................... 6

4.1 Attachment of Detachable Plate ................................................. 6

4.2 Detachment of Detachable Plate ............................................... 7

5. Maintenance ...................................................................................... 8

5.1 Preparation for Cleaning............................................................. 8

5.2 Preparation for Grease ............................................................... 8

5.3 Inspection, Cleaning, and Lubrication Spots .............................. 9

5.3.1 Detachable Plate................................................................ 9

0505-001

4 AJYESO-P0505-001

1. Scope

To prevent minute components from dispersing on the PCB beforehand, the

area preventing the dispersion can be expanded by covering the area except

for the minimum (smallest) one with a detachable plate.

2. Specifications

Item Description Special Remarks

1. Applicable Models • TCM-X110, TCM-X110M

• TCM-X210

• TCM-X300, TCM-X300S

2. Required Plates Use PLATE-1 or PLATE-2 properly according to the

size of the components to be mounted.

• PLATE-1

Opening : φ 26 mm

Mounting Component Size :

0.6 mm × 0.3 mm to 5 mm × 5 mm

• PLATE-2

Opening : 50 mm x 60 mm

Mounting Component Size :

0.6 mm × 6.3 mm to 15 mm × 15 mm

• Common Items for PLATE-1 and PLATE-2

Height of Component : Max. 4.5 mm

Height of Previously-Placed Component :

Max. 4.5 mm

(Upward Warpage of PCB : Max. 1 mm)

Offset for Nozzle Attachment : Max. 0.8 mm

The above-described mounting component size represents

the range where the outline of a component does not

interfere with the opening and more than 0.9 mm can be

secured as a leeway between the lower face of the

normally picked component and the upper face around

the opening

Note : When PLATE-1 is used for the mounting

components taller than 2.5 mm, a component will

be flipped vertically if not picked up correctly,

causing the bottom of the component to interfere

with the upper face around the opening of

PLATE-1.