Maintenance Schedule保养计划.pdf - 第29页

Page 38 Vision XP+ V AC / XP + / XP / XS 2 Mainte nance 2.9 Co ndensate T rap Service Instructions V ersion 1.3 2.9.6 Cleaning of Condens ate T ra p VXS (Option) Fig. 2-54 Condensa te trap Fig. 2-55 Condensa te trap 1 Fi…

Vision XP+ VAC / XP+ / XP / XS Page 37

2 Maintenance

2.9 Condensate Trap

Service Instructions

Version 1.3

2.9.5 Cleaning Work at the Cooler Units (D)

Fig. 2-50 Pulling Out the Cooler Unit

Fig. 2-51 Pulling Out the Filter unit F9

Fig. 2-52 Metal Frame

Fig. 2-53 Drip pan

The cooler units are located in the

bottom row of the condensate trap.

Consumable materials, tools:

• Oven cleaner

• Rags

• Rinsing bath

• Allen wrench 2,5 mm

Procedure:

1. Open both locking levers and

pull out the cooler unit.

2. Pull the filter (F9) out of the

cooler unit.

3. Lift the cooler out of the cooler

unit and set it into the rinsing

bath as well

4. Open the metal frame of the

filter (F9) with a 2,5 mm allen

wrench and replace the paper

filter (one-way).

Caution!

The seals must protrude from

the bath. Otherwise they will be

damaged.

5. Clean the seals with industrial

alcohol and rags.

6. Pull out the catch pan, empty it

an set it into the rinsing bath.

7. Clean the opening for the cooler

unit at the condensate trap with

oven cleaner and rags.

8. Reassemble cleaned parts and

insert them into the condensate

trap.

9. All connections restore.

Page 38 Vision XP+ VAC / XP+ / XP / XS

2 Maintenance

2.9 Condensate Trap

Service Instructions

Version 1.3

2.9.6 Cleaning of Condensate Trap VXS (Option)

Fig. 2-54 Condensate trap

Fig. 2-55 Condensate trap 1

Fig. 2-56 Condensate trap 2

Fig. 2-57 Condensate trap 3

The condensate trap is installed in

the back of the machine.

Consumable materials:

• Cleaning agent

• Cleaning cloth

Procedure:

1. Open the casing doors at the

back of the machine.

2. Now disconnect the quick con-

nectors from the cooling unit.

3. Loose the knurled screws to

pull out the cooling units. Now

put the units in a cleaning bath.

4. Also, pull out the gauze filter

from the condensate trap and

put it in a cleaning bath.

– Clean up all contaminated

surfaces with a cleaning

cloth and a suitable clean-

ing agent.

– Put the cleaned cooling unit

and filter back to the con-

densate trap.

– After the cleaning proce-

dure put all items together

again in reverse order.

– Fix the knurled screws and

connect the flexible hoses

again in correct order - see

picture above.

Note!

The quick couplings should be lubri-

cated occasionally, using suitable

lubricant, thereafter audibly click the

couplings back in.

Vision XP+ VAC / XP+ / XP / XS Page 39

2 Maintenance

2.9 Condensate Trap

Service Instructions

Version 1.3

Fig. 2-58 Residue Bottle

– Unscrew the polyethylene

bottle.

– If possible, empty the con-

tents of the bottles into the

disposal container, and dis-

pose of the

residue properly.

– If the bottle cannot be emp-

tied, replace them with new

bottle.

– Screw the bottle back into

place.