Maintenance Schedule保养计划.pdf - 第6页

Vision XP+ V AC / XP+ / XP / XS Page 15 2 Mainte nance 2.4 Proces s Chamber Service Instructions V ersion 1.3 2.4 Process Cha mbe r 2.4.1 Cleaning the Interior Fig. 2-1 Cleaning the Interior Consumable ma terials: • Oven…

100%1 / 44
Page 14 Vision XP+ VAC / XP+ / XP / XS
2 Maintenance
2.3 Maintenance Schedule
Service Instructions
Version 1.3
Tab. 2-2 Maintenance Schedule Basic
Conveyor system Inspection of chain
oil fill level
x 1 min 2 min Chain oil
Inspection of chain
tension
x 10 min 30 min
if
necessary
Chain oil
Felt pad checking if
necessary exchange
x 1 min 3 min Felt
Sensors checking x 1 min 2 min
Control cabinets Vacuuming and
cleaning
x 10 min
Fan covers Vacuuming and
cleaning
x 2 min 5 min Vacuum
cleaner
Complete system Electrical safety
check by safety
specialist
x 2 h
Complete
maintenance check
by Rehm Thermal
Systems
x 8 h Due to wear
Sector Maintenance task
(inspection, cleaning
and replacement of
parts if necessary)
Daily
Weekly
Fortnightly
Monthly
Quarterly
Semiannually
Annually
Inspection Time
Maintenance Time
Replacement
Recommende
d Parts and
Materials
Vision XP+ VAC / XP+ / XP / XS Page 15
2 Maintenance
2.4 Process Chamber
Service Instructions
Version 1.3
2.4 Process Chamber
2.4.1 Cleaning the Interior
Fig. 2-1 Cleaning the Interior
Consumable materials:
• Oven cleaner
• Rags
Procedure:
1. Raise the process chamber as
far as it will go.
2. Clean the process chamber
floor and side panels with oven
cleaner and a rag.
3. Clean the heater nozzles and
the nozzle sheets in the peak
zone.
4. Remove stubborn incrustations
with the putty knife.
Page 16 Vision XP+ VAC / XP+ / XP / XS
2 Maintenance
2.4 Process Chamber
Service Instructions
Version 1.3
2.4.2 Cleaning of oven stations
Fig. 2-2 cleaning of oven station
Fig. 2-3 cleaning of oven station
Expendable materials:
• Oven cleaning agent
• Cleaning cloths
• Paint brush
• Chain oil Addinol
Procedure:
1. Remove the cover of the oven
station.
2. Clean spindles from the PCB and
CBS width adjustment at the inlet
and the outlet as well as the oven
stations with cleaning cloths and
oven cleaning agent.
3. Oil the spindles with the paint
brush after the cleaning.
4. Check the spindle nut regularly
for „clearance“.
Spindle nut