W08b_c_W04b Feeder Operation Manual_074133.pdf - 第3页

W08b(c), W04b Feeder Operation Manual Page 3 of 10 Contents 1. Introduc tion ................................................................................................................... ...........................…

100%1 / 10
W08b(c), W04b Feeder Operation Manual Page 2 of 10
Revision Summary
Number Date Details of change
R3 January 8, 2008 Newly created
R4 January 9, 2008 FIFW08b, FIFW04b support
R5 October 2, 2008 Tape type changeover dip switch no longer used, complete revision
R6 November 24, 2008 FIFW08c support
W08b(c), W04b Feeder Operation Manual Page 3 of 10
Contents
1. Introduction.............................................................................................................................................. 4
2. Required Items......................................................................................................................................... 4
3. Using the W08b(c), W04b Feeder........................................................................................................... 5
3.1 Automatic identification of tape part package type .................................................................................................5
3.2 Feeder operation panel ..........................................................................................................................................7
4. Troubleshooting Automatic Identification of Tape Part Package Type ............................................. 8
5. Cautions.................................................................................................................................................. 10
W08b(c), W04b Feeder Operation Manual Page 4 of 10
1. Introduction
In comparison with existing feeders, the W08b(c), W04b feeder has a shorter gap between the tape
indexing sprocket and the pickup position, and is designed to improve the pickup accuracy.
This prevents part loading errors because the image of the part package is automatically identified
by the machine.
This manual provides procedures for using the W08b(c), W04b feeder.
2. Required Items
The following items are necessary to use the W08b(c), W04b feeder.
Required units
FIFW04b (Fuji Intelligent Feeder W04b)
FIFW08b (Fuji Intelligent Feeder W08b)
FIFW08c (Fuji Intelligent Feeder W08c)
Required software
• NXT software V5.07 and later
• Fuji Flexa V4.3.0 and later
Cautions
Update the spec data in Job Builder when using Fuji Intelligent feeders W04b (FIFW04b).
The dip switch for tape type changeover cannot be used from NXT V5.07 and later.