SOM-2080-001_w.pdf - 第46页

43 SOM-2080 Erroe ID Error Name, Description, Cause, and Remedy 431629 Tray Feeder Zeroing Error Tray feeder zeroing operation error ----- 43162a Tray Feeder Zeroing Error Tray feeder zeroing operation error ----- 43162b…

100%1 / 179
42
SOM-2080
Erroe ID Error Name, Description, Cause, and Remedy
43161a Tray Feeder Zeroing Error
Pallet chuck CLOSE error
-----
43161b Tray Feeder Zeroing Error
Rack shutter CLOSE error
-----
43161c Tray Feeder Zeroing Error
Erro ao fazer o ZERO no Tray Unit
-----
43161d Tray Feeder Zeroing Error
Erro ao fazer o ZERO no Tray Unit
-----
43161e Tray Feeder Zeroing Error
Erro ao fazer o ZERO no Tray Unit
-----
43161f Tray Feeder Zeroing Error
Tray feeder zeroing operation error
-----
431620 Tray Feeder Zeroing Error
Tray feeder zeroing operation error
-----
431621 Tray Feeder Zeroing Error
Tray feeder zeroing operation error
-----
431622 Tray Feeder Zeroing Error
Tray feeder zeroing operation error
-----
431623 Tray Feeder Zeroing Error
Tray feeder zeroing operation error
-----
431624 Tray Feeder Zeroing Error
Tray feeder zeroing operation error
-----
431625 Tray Feeder Zeroing Error
Tray feeder zeroing operation error
-----
431626 Tray Feeder Zeroing Error
Tray feeder zeroing operation error
-----
431627 Tray Feeder Zeroing Error
Tray feeder zeroing operation error
-----
431628 Tray Feeder Zeroing Error
Tray feeder zeroing operation error
-----
6.4 Tray Feeder
1005-001
43
SOM-2080
Erroe ID Error Name, Description, Cause, and Remedy
431629 Tray Feeder Zeroing Error
Tray feeder zeroing operation error
-----
43162a Tray Feeder Zeroing Error
Tray feeder zeroing operation error
-----
43162b Tray Feeder Zeroing Error
Tray feeder zeroing operation error
-----
43162c Tray Feeder Zeroing Error
Tray feeder zeroing operation error
-----
43162d Tray Feeder Zeroing Error
Tray feeder zeroing operation error
-----
43162e Tray Feeder Zeroing Error
Tray feeder zeroing operation error
-----
43162f Tray Feeder Zeroing Error
Tray feeder zeroing operation error
-----
431630 Tray Feeder Zeroing Error
Tray resupply traverse zeroing operation pre-check error
-----
431631 Tray Feeder Zeroing Error
A remaining pallet was detected. Open the resupply cover and remove the pallet.
[B6217]
-----
431632 Tray Feeder Zeroing Error
Tray resupply traverse pallet chuck unclamped error [Y6237]
-----
431633 Tray Feeder Zeroing Error
The pallet discharging shutter could not be opened on time. [Y6238]
-----
431634 Tray Feeder Zeroing Error
Tray resupply traverse zeroing operation error
-----
431635 Tray Feeder Zeroing Error
A flying pallet was detected at the pallet discharging spout. [Y6217]
-----
431636 Tray Feeder Zeroing Error
The pallet discharging shutter could not be closed on time. [Y6238]
-----
6.4 Tray Feeder
1005-001
44
SOM-2080
Erroe ID Error Name, Description, Cause, and Remedy
431637 Tray Feeder Zeroing Error
The tray resupply traverse cannot detect the pallet. Open the resupply cover and
check the pallet conditions. [B6215]
-----
431638 Tray Feeder Zeroing Error
The tray resupply traverse has a history of drawing but the detection is impossible.
[B6215]
The drawing history was cleared. Perform the zeroing operation again.
431639 Tray Feeder Zeroing Error
The tray resupply traverse has no history of drawing but a pallet was detected.
[B6215]
Remove the pallet and perform the zeroing operation again.
43163a Tray Feeder Zeroing Error
Tray resupply door power lock OPEN
-----
43163b Tray Feeder Zeroing Error
The rack shutter on the lower magazine operator side could not be opened on
time. [B6221]
-----
43163c Tray Feeder Zeroing Error
The rack shutter on the upper magazine operator side could not be opened on
time. [B6223]
-----
43163d Tray Feeder Zeroing Error
The rack shutter on the lower magazine operator side could not be closed on
time. [B6221]
-----
43163e Tray Feeder Zeroing Error
The rack shutter on the upper magazine operator side could not be closed on
time. [B6223]
-----
43163f Tray Feeder Zeroing Error
Tray resupply traverse pallet chuck unclamped error
-----
431801 Tray Feeder in advance check error
Tray power supply unturning on(power supply cut off from main machine)
-----
431802 Tray Feeder in advance check error
Main machine safety cover OPEN
-----
431803 Tray Feeder in advance check error
Tray maintenance cover OPEN
-----
6.4 Tray Feeder
1005-001