4OM-1054-002.pdf - 第276页

Error ID ltem Description 800701 Alternated Block Comp. Missing(sensor) 800702 Alternated Block Comp. V ertical(sensor) 800703 Alternated Block Comp. Missing(recog.) 800704 Alternated Block Comp. Recog. Error 800705 Alte…

100%1 / 337
Error ID ltem Description
800501 Alternated Feeder Carriage Axis Comp. Missing(sensor)
800502 Alternated Feeder Carriage Axis Comp. Vertical(sensor)
800503 Alternated Feeder Carriage Axis Comp. Missing(recog.)
800504 Alternated Feeder Carriage Axis Comp. Recog. Error
800505 Alternated Feeder Carriage Axis Shortage of component
800506 Alternated Feeder Carriage Axis Start recovery mode.
800507 Alternated Feeder Carriage Axis Comp. Thickness(sensor)
800508 Alternated Feeder Carriage Axis Comp. Pickup Diff.(recog.)
800509 Alternated Feeder Carriage Axis Comp. Reverse(recog.)
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
800601 Alternated Feeder Carriage Axis Comp. Missing(sensor)
800602 Alternated Feeder Carriage Axis Comp. Vertical(sensor)
800603 Alternated Feeder Carriage Axis Comp. Missing(recog.)
800604 Alternated Feeder Carriage Axis Comp. Recog. Error
800605 Alternated Feeder Carriage Axis Shortage of component
800606 Alternated Feeder Carriage Axis Start recovery mode.
800607 Alternated Feeder Carriage Axis Comp. Thickness(sensor)
800608 Alternated Feeder Carriage Axis Comp. Pickup Diff.(recog.)
800609 Alternated Feeder Carriage Axis Comp. Reverse(recog.)
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
3.3 Error IDs and Remedial Procedures
0307-005 2-158 AGS01ETRP
Error ID ltem Description
800701 Alternated Block Comp. Missing(sensor)
800702 Alternated Block Comp. Vertical(sensor)
800703 Alternated Block Comp. Missing(recog.)
800704 Alternated Block Comp. Recog. Error
800705 Alternated Block Shortage of component
800706 Alternated Block Start recovery mode.
800707 Alternated Block Comp. Thickness(sensor)
800708 Alternated Block Comp. Pickup Diff.(recog.)
800709 Alternated Block Comp. Reverse(recog.)
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
800801 Start Auto Recovery Mode Comp. Missing(sensor)
800802 Start Auto Recovery Mode Comp. Vertical(sensor)
800803 Start Auto Recovery Mode Comp. Missing(recog.)
800804 Start Auto Recovery Mode Comp. Recog. Error
800805 Start Auto Recovery Mode Shortage of component
800806 Start Auto Recovery Mode Start recovery mode.
800807 Start Auto Recovery Mode Comp. Thickness(sensor)
800808 Start Auto Recovery Mode Comp. Pickup Diff.(recog.)
800809 Start Auto Recovery Mode Comp. Reverse(recog.)
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
3.3 Error IDs and Remedial Procedures
0307-004 2-159 AGS01ETRP
3.3 Error IDs and Remedial Procedures
Error ID ltem Description
800901 Alarm For Shortage of Comp. The tape end was detected.
800902 Alarm For Shortage of Comp. Few components to feed.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
800A01 Product Information Finished product interval :
800A02 Product Information Auto run interval :
800A03 Product Information Nozzle usage interval :
800A04 Product Information Product started by RUN MODE "PASS" Operation.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
800B01 Machine Interface Signal No signal from furnace.
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
800C01 Cancel Recovery on
(Cause 1) Self-Diagnostics Error Message
(Remedy 1) Zero all axes and re-start the operation.
When the machine cannot be set to its normal condition, consult our service
personnel for the remedy.
0307-005 2-160 AGS01ETRP