LBO für minimale LP-Breite 50mm an D4.pdf - 第32页

2 Assembly instructions SOKO St opper LBO for minimum board size 50 mm SIPLACE D4 LBO 50 mm SIPLACE D4 11/2007 Edition 32 2.3 Hardware 2.3.1 Inst allation of stopper unit 2 Please demount the cover of placem ent ar ea 2 …

100%1 / 50
LBO 50 mm SIPLACE D4 2 Assembly instructions SOKO Stopper LBO for minimum board size 50 mm SIPLACE D4
11/2007 Edition
31
2.2.2 Laser safety instructions
2
Laser radiation! 2
The radiation from the laser diode (infrared or IR
light) of the laser light barrier is harmful to the human
eye. 2
: So never look into the laser beam!
: Make sure that the laser beam cannot be reflected
during use.
2
2
2
2
2
2
2
The laser beam output at the barcode template window does not exceed 1.0 mW. The laser light
barrier thus conforms to protection class 2. 2
There must be no manipulation of the barrier. 2
2
2
2
2 Assembly instructions SOKO Stopper LBO for minimum board size 50 mm SIPLACE D4 LBO 50 mm SIPLACE D4
11/2007 Edition
32
2.3 Hardware
2.3.1 Installation of stopper unit
2
Please demount the cover of placement area 2 to ease the laying of the cables. Before switching
the machine on, the cover has to be mounted.
Without cover placement area 2 is not secured! 2
2
: Switch off the placement system at the main switch.
: Demount the covers of the output area..
2
Fig. 2.11 - 1 Remove covers of the output area
Loosen screws
LBO 50 mm SIPLACE D4 2 Assembly instructions SOKO Stopper LBO for minimum board size 50 mm SIPLACE D4
11/2007 Edition
33
2
Fig. 2.11 - 2 Remove covers of the output area and conveyor
: Mount the stopper guidance at the left side frame of the output conveyor.
2
Fig. 2.11 - 3 Mounting of stopper guidance
Remove cover of output conveyor
Tighten screws loose
Screws to fix the
guiding shafts