TP2194.User Definition_Setting Item Editor_Manual.pdf - 第3页
SMT Software Engineering G roup IM Operations Y AMAHA MOTOR CO., L TD. MDOC-SOFT50065 3/9 4. Usage 4.1 S tart of ”User Definition_Setti ng Item Editor” 4.1.1 If you ha ve “Y.F acT” Step 1. Start “Board Explorer” of “Y.Fa…
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD.
MDOC-SOFT50065
2/9
1. Introduction
The target model and version are as follows.
Table1 Target model and version
Item Object Remarks
Target models IT-System Server Utility,
Yamaha Factory Tool :P-Tool, M-Tool, S-Tool
Target version V1.20STD R1.000 or later
2. Outline
“User Definition” ” is a function to register items other than surface-mounted components
as IDs. By registering setup items as IDs, it will prevent setup mistakes.
For instance, “Pushup pin plate”, “Bare board pack”, etc. can be registered.
“User Definition_Setting Item Editor” makes a table of items to be registered as “User
Definition”, which should be checked with “Setup verification” for a board of a target
machine.
3. Setting
To use this function, you need to register “User Definition_Name Table” and “User
Definition_Item Name ID Contrast Table” with “ID Editor”.
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD.
MDOC-SOFT50065
3/9
4. Usage
4.1 Start of ”User Definition_Setting Item Editor”
4.1.1 If you have “Y.FacT”
Step 1. Start “Board Explorer” of “Y.FacT” and select a machine and a board you want to
make a table of items to be setup.
Step 2. Right-click on the machine the board and select “User Definition_Setting Item
Editor”. Then “User Definition_Setting Item Editor” window is displayed.
Figure 4.1.1 Selection from “Board Explorer”
Menu starts by right-
clicking
Target board
of target
machine to be made is
selected.
“
User Definition_Setting
Item Editor” is selected
SMT Software Engineering Group
IM Operations YAMAHA MOTOR CO., LTD.
MDOC-SOFT50065
4/9
4.1.2 If you have “Y.FacT”
Step 1. Start “User Definition_Setting Item Editor” of “YAMAHA IT-System”.
“User Definition_Setting Item Editor” machine board selection window is
displayed. (Figure 4.1.2)
Step 2. Select a board you want to make table of items that should be setup.
1, Input a board name into [Target Board].
2, If the board is a single board, select [Single Board].
If the board is a combined board, select [Combined Board].
* By default, [Single Board] is selected.
3, Input a machine serial of the machine into [Target Machine Serial].
Click the [OK] button after inputting all of them.
“User Definition_Setting Item Editor” window is displayed.
Figure 4.1.2 “User Definition_Setting Item Editor” machine board selection window
Target board is input
Target machine serial is input
Select Single Board or
Combined Board
Revised with revision No. 2